Suntan ALUMINUM ELECTROLYTIC CAPACITORS ® C H IP TYPE S ER IE S TS13CC FEATU R E S ‧ Load life of 5000 hours with temperature up to +125℃ ‧ Case size from Ø12.5 to Ø16 ‧ Lead-free reflow soldering is available subject to customers’ request. Mid-To-High Voltage Specifications I T E M S P E R F O R M A N C E Operating Temperature Range Voltage Range Capacitance Range Capacitance Tolerance Leakage Current C H A R A C T E R I S T I C S -40℃ ~ +125℃ 160~450V 3.3~68μF ±20% at 120Hz, 20℃ After 2 minutes’ application of rated voltage, leakage current is not more than 0.04CV or 100μA Tan δ Measurement frequency : 120Hz, Temperature : 20℃ Rated voltage (V) 160~250 400,450 Tan δ (MAX) Ø12.5~Ø16 0.15 0.20 Stability at Low Temperature Measurement frequency : 120Hz Rated voltage (V) Impedance ratio Z-25℃ / Z+20℃ Ø12.5~Ø16 ZT / Z20 (MAX) Z-40℃ / Z+20℃ Load Life After 5000 hours’ application of rated voltage at 105℃, capacitors meet the characteristics requirements listed at right Self Life After leaving capacitors under no load at 105℃ for 1000 hours, they meet the specified value for load life characteristics listed above. Resistance to Soldering Heat After reflow soldering according and restored at room temperature, they meet the characteristics requirements listed at right. Applicable Standards JIS C-5141 and JIS C-5102 160 3 6 200 3 6 250 3 6 400 6 10 450 6 10 Capacitance Change Leakage Current Tan δ Capacitance Change Tan δ Leakage Current Within ± 30% of initial value Initial specified value or less 300% or less of initial specified value Within ± 10% of initial value Initial specified value or less Initial specified value or less Chip type Re: Date code and series type—1stdigit for Year; 3rd&4thcharacters for Series. Suntan® Technology Company Limited D×L Φ12.5×13.5 Φ12.5×16 Φ16×16.5 A 4.7 4.7 5.5 B 13.0 13.0 17.0 C 13.0 13.0 17.0 E±0.2 4.6 4.6 6.7 L 13.5 16.0 16.5 2nddigit for Quarter, 4 quarter codes in one year are 1, 4, 7, O; Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246 Suntan ALUMINUM ELECTROLYTIC CAPACITORS ® C H IP TYPE S ER IE S TS13CC Standard size & Maximum permissible ripple current WV Cap.(μF) 160 200 250 400 450 2C 2D 2E 2G 2W 3.3 3R3 4.7 4R7 10 100 22 220 12.5×13.5 33 330 47 68 12.5×13.5 40 12.5×13.5 65 12.5×16 50 12.5×16 50 16×16.5 85 16×16.5 85 CaseSize Ripple Current 12.5×13.5 80 12.5×16 105 85 12.5×16 110 16×16.5 180 12.5×13.5 95 16×16.5 220 470 16×16.5 260 680 16×21.5 320 Ripple Current (mA rms) at 105℃ 120Hz Frequency Coefficient Factor of Rated Ripple Current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz~ Coefficient 0.80 1.00 1.25 1.40 1.60 Email: [email protected] Tel: (852) 8202 8782 Note: Specification are subject to change without notice. For more detail and update, please visit our website. Suntan® Technology Company Limited Website: www.suntan.com.hk Fax: (852) 8208 6246