Suntan ALUMINUM ELECTROLYTIC CAPACITORS ® C H IP TYPE S ER IE S TS13C7 FEATU R E S ‧ Load life of 3000~5000 hours with temperature up to 105℃ ‧ Lead-free reflow soldering is available subject to customers’ request. 3000~5000 Hours Load Life Specifications I T E M S P E R F O R M A N C E Operating Temperature Range Voltage Range Capacitance Range Capacitance Tolerance Leakage Current Tan δ C H A R A C T E R I S T I C S -55℃ ~ +105℃ 6.3~100V 0.1~4700μF ±20% at 120Hz, 20℃ For Ø4~Ø10, After 2 minutes’ application of rated voltage, leakage current is not more than 0.01CV or 3μA, whichever is greater. For Ø12.5~Ø16, After 1 minutes’ application of rated voltage, leakage current is not more than 0.03CV or 4μA, whichever is greater. Measurement frequency : 120Hz, Temperature : 20℃ Rated voltage (V) 6.3 Tan δ (MAX) Ø4~Ø10 0.28 Ø12.5~Ø16 0.38 10 0.24 0.34 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX) Z-25℃ / Z+20℃ Z-40℃ / Z+20℃ Z-25℃ / Z+20℃ Z-40℃ / Z+20℃ Ø4~Ø10 Ø12.5~Ø16 16 0.20 0.30 25 0.16 0.26 6.3 4 10 5 12 10 3 7 4 10 35 0.13 0.22 16 2 5 3 8 25 2 3 2 5 50 0.12 0.18 35 2 3 2 4 63 0.12 0.18 50 2 3 2 3 100 0.12 0.18 63 2 3 2 3 100 2 3 2 3 Load Life After 5000 hours’( 3000 hours for Ø4~ Ø6.3 and Ø 8*6.2) application of rated voltage at 105℃ capacitors meet the characteristics requirements listed at right Self Life After leaving capacitors under no load at 105℃ for 1000 hours, they meet the specified value for load life characteristics listed above. Resistance to Soldering Heat After reflow soldering according and restored at room temperature, they meet the characteristics requirements listed at right. Applicable Standards JIS C-5141 and JIS C-5102 Capacitance Change Leakage Current Tan δ Within ± 30% of initial value Initial specified value or less 300% or less of initial specified value Capacitance Change Tan δ Leakage Current Within ± 10% of initial value Initial specified value or less Initial specified value or less Chip type *1 Voltage mark [6V] represents 6.3V for Ф4~Ф10; *2 [L±0.5] is applicable to Φ8×10.5~Ф10; *3 [L±1.0] is applicable to Φ12.5~Ф16. Re: Date code and series type — 1st digit for Year; 2nd digit for Quarter, 4 quarter codes in one year are 1, 4, 7, O; 3rd character for Series; KL Series = K. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246 Suntan ALUMINUM ELECTROLYTIC CAPACITORS ® TS13C7 (mm) D×L Φ4×5.8 Φ5×5.8 Φ6.3×5.8 Φ6.3×7.7 A B C E±0.2 L 1.8 4.3 4.3 1.0 5.8 2.1 5.3 5.3 1.3 5.8 2.4 6.6 6.6 2.2 5.8 2.4 6.6 6.6 2.2 7.7 Φ8×6.2 Φ8×10.5 Φ10×10.5 Φ10×13.5 Φ12.5×13.5/16 Φ16×16.5/21.5 3.3 8.3 8.3 2.2 6.2 2.9 8.3 8.3 3.1 10.5 3.2 10.3 10.3 4.4 10.5 3.2 10.3 10.3 4.4 13.5 4.7 13.0 13.0 4.4 13.5/16 5.5 17.0 17.0 6.7 16.5/21.5 Case Size WV Cap. (μF) 6.3 10 16 25 0J 1A 1C 1E 10 100 4×5.8 18 5×5.8 27 22 220 4×5.8 22 5×5.8 30 5×5.8 30 6.3×5.8 44 33 330 5×5.8 35 5×5.8 36 6.3×5.8 48 6.3×5.8 50 47 470 5×5.8 38 6.3×5.8 50 6.3×5.8 50 6.3×7.7 63 (8×6.2) 63 100 101 6.3×5.8 69 6.3×7.7 81 6.3×7.7 81 (8×6.2) -81 (8×6.2) 81 8×10.5 116 150 151 6.3×7.7 85 (8×6.2) 85 8×10.5 125 8×10.5 125 10×10.5 320 220 221 6.3×7.7 120 (8×6.2) 120 8×10.5 141 10×10.5 216 10×10.5 320 330 331 8×10.5 290 10×10.5 290 10×10.5 290 10×10.5 320 470 471 10×10.5 320 10×10.5 320 10×10.5 320 12.5×13.5 400 (10×13.5) -350 680 681 10×10.5 320 10×10.5 320 10×13.5 420 12.5×13.5 415 1000 102 10×10.5 410 10×13.5 390 12.5×13.5 550 12.5×13.5 460 1500 152 10×13.5 450 12.5×13.5 480 12.5×13.5 650 12.5×16 700 2200 222 12.5×13.5 680 12.5×16 750 (12.5×13.5) -510 16×16.5 800 3300 332 12.5×16 850 (12.5×13.5) 800 16×16.5 800 4700 472 16×21.5 1500 16×21.5 1100 Case Size Ripple Current Allowable Ripple (mA rms) at 105℃ 120Hz Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246 Suntan ALUMINUM ELECTROLYTIC CAPACITORS ® TS13C7 WV Cap. (μF) 35 50 63 100 1V 1H 1J 2A 0.1 0R1 4×5.8 1 0.22 R22 4×5.8 2.6 0.33 R33 4×5.8 3.2 0.47 R47 4×5.8 5 1 10 4×5.8 8 2.2 2R2 4×5.8 12 3.3 3R3 4×5.8 17 4.7 4R7 4×5.8 16 5×5.8 22 10 100 5×5.8 27 6.3×5.8 32 22 220 6.3×5.8 44 6.3×7.7 58 (8×6.2) 58 33 330 8×10.5 47 470 10×10.5 68 680 100 101 6.3×7.7 57 (8×6.2) -57 8×10.5 92 10×10.5 151 150 151 10×10.5 290 220 221 10×10.5 375 330 331 12.5×13.5 470 10×10.5 6.3×7.7 30 (8×6.2) 30 8×10.5 50 8×10.5 55 6.3×7.7 45 (8×6.2) -45 8×10.5 65 10×10.5 70 140 10×10.5 80 10×10.5 80 310 10×10.5 90 12.5×13.5 250 (10×13.5) 150 310 10×10.5 310 12.5×13.5 340 (10×13.5) 320 380 12.5×16 (10×13.5) -375 471 12.5×13.5 520 680 681 12.5×13.5 550 1000 102 16×16.5 750 (12.5×16) 600 2200 222 16×21.5 1350 10×13.5 150 12.5×13.5 470 600 16×16.5 650 (12.5×13.5) -500 (12.5×16) 550 16×16.5 700 16×21.5 850 16×21.5 950 12.5×13.5 300 16×16.5 600 (12.5×16) 420 (12.5×13.5) 380 Case Size Ripple Current Ripple Current (mA rms) at 105℃ 120Hz Frequency coefficient of allowable ripple current Frequency Capacitance (μF) Φ4~Φ10 Φ12.5~Φ16 ~68 100~470 680~3300 50Hz 120Hz 300Hz 1kHz 10kHz~ 0.70 0.75 0.80 0.85 1.00 1.00 1.00 1.00 1.17 1.35 1.23 1.10 1.36 1.57 1.34 1.13 1.50 2.00 1.50 1.15 Note: Specification are subject to change without notice. For more detail and update, please visit our website. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246