Suntan AXIAL TYPE ALUMINUM ELECTROLYTIC CAPACITORS LOW LEAKAGE CURR ENT, 2 R UB B E R ® TYPE FEATU R E S TS13AD I T E M S C ‧ 85℃, 2000 hours assured. ‧ For general purpose application H A R A C T E R I Capacitance Tolerance(120Hz 20℃) Voltage Range Operating Temperature Range Capacitance Tolerance ±20% (M) 6.3 ~ 160 WV -40℃ ~ +85℃ ±20% (M) Surge Voltage (V) (20℃) WV 6.3 10 16 25 35 50 63 SV 8 13 20 32 44 63 79 I ≤ 0.01CV or 3 (µA) Whichever is greater (after 3 minutes applying the rated DC working voltage at 20℃) where: C = rated capacitance in µF. V = rated DC working voltage in V. Leakage Current(uA)(20℃) Dissipation Factor (Tanδ) (At 20℃, 120Hz) Low Temperature Characteristics Load Life Shelf Life S T 100 125 I C 160 200 WV 6.3 10 16 25 35 50 63 100 160 DF 24 20 16 14 12 10 10 10 20 For capacitors whose capacitance exceeds 1,000µF, the specification of tanδ is increased by 0.02 for every addition of 1,000µF. Impedance radio at 120Hz. Comparison Z\ WV 6.3 10 16 25 35 50 63 100 160 -25℃ / +20℃ 4 3 2 2 2 2 3 2 3 -40℃ / +20℃ 8 6 4 4 4 2 3 3 After 2000 hours application of Capacitance Change rated voltage at 85℃, capacitors Dissipation Factor meet the characteristics Leakage Current requirements listed at right. After leaving capacitors under no load at 85℃ for 500 hours specified value for load life characteristics listed above. Less than ±25% of initial value Less than 200% of specified value Initial specified value of less and applying voltage they meet the DIAGRAM OF DIMENSIONS Unit:mm LEAD DIAMETER Suntan® Technology Company Limited Website: www.suntan.com.hk ØD 5 Ød 0.5 6.3 8 10 13 16 18 0.6 1.0 2.0 b 0.5 1.0 Tel: (852) 8202 8782 25 0.8 a Email: [email protected] 22 Fax: (852) 8208 6246 Suntan AXIAL TYPE ALUMINUM ELECTROLYTIC CAPACITORS LOW LEAKAGE CURR ENT, 2 R UB B E R ® TYPE TS13AD DIMENSIONS: Diameter (DØ) x Length (L) m/m RIPPLE CURRENT. mA at 85℃, 120Hz V.DC 6.3V 10V 16V 25V 35V 50V 63V 100V (0J) (1A) (1C) (1E) (1V) (1H) (1J) (2A) 160V (2C) µF ØDxL mA ØDxL mA ØDxL mA ØDxL mA ØDxL mA ØDxL mA ØDxL mA ØDxL mA ØDxL mA 3.3 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 8x16 33 4.7 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 8x16 39 10 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 8x20 60 22 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 8x16 120 10x26 120 33 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 8x16 150 13x26 170 47 -- -- -- -- -- -- -- -- -- -- -- -- 8x16 160 8x20 190 16x32 230 100 -- -- -- -- -- -- -- -- 8x16 210 8x16 220 8x20 260 10x26 340 16x41.5 430 220 -- -- -- -- 8x16 260 8x16 280 8x20 340 10x21 410 10x26 480 13x26 560 22x41 680 330 8x16 250 8x16 300 8x16 320 8x20 380 10x21 460 10x26 560 13x26 650 13x31 750 25x53 940 470 8x16 330 8x16 350 8x20 430 10x21 510 10x26 610 13x36 730 13x31 840 16x32 970 25x53 1200 1000 10x21 600 10x21 640 10x26 770 13x26 900 13x31 1060 16x32 1260 16x32 1330 22x41 1540 -- -- 2200 13x26 1020 13x26 1090 13x31 1180 16x32 1480 16x32 1580 18x40 1920 22x41 2160 25x53 2430 -- -- 3300 13x26 1200 13x31 1390 16x32 1620 16x40 1710 18x40 2050 22x41 2340 22x52 2470 -- -- -- -- 4700 16x32 1500 16x32 1730 16x40 1840 18x40 2170 22x41 2470 22x52 2650 25x53 2710 -- -- -- -- 6800 16x32 1840 16x40 1930 18x40 2310 22x41 2580 22x52 2720 25x53 2910 -- -- -- -- -- -- 10000 16x32 2260 18x40 2350 22x41 2620 22x52 2940 25x53 3600 -- -- -- -- -- -- -- -- 15000 22x41 2450 22x41 2730 22x52 2860 25x53 3880 -- -- -- -- -- -- -- -- -- -- 22000 22x52 2550 22x52 2940 25x53 3630 -- -- -- -- -- -- -- -- -- -- -- -- Note: Specification are subject to change without notice. For more detail and update, please visit our website. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246