QCK5
PHOTOTRANSISTOR OPTICAL
INTERRUPTER SWITCH
PACKAGE DIMENSIONS
2
3
C
L
PIN 1 CATHODE
PIN 2 ANODE
0.2200
C
L
PIN 3 EMITTER
PIN 1
IDENTIFICATION
PIN 4 COLLECTOR
4
1
0.527
C
L
C
L
0.185
FEATURES
0.157
OPTICAL CL
0.020SQ
(4X)
0.015
0.100±0.005
0.280
• No contact switching
(4X)
0.295±0.005
0.365±0.020
OPTICAL CL
• 4 mm wide slot
0.0283
0.400±0.020
2
3
1
4
• Leads formed for surface mounting
45.0°
(2X)
0.1215
SCHEMATIC
0.060±0.020
(4X)
• Housing material resistant to high
0.085
(4X)
temperatures
0.370±0.020
• Daylight filter on sensor
• Transistor Output
C
L
• Tape & Reel Option: .TR (See Tape & Reel Dimensions)
OPTICAL CL
C
L
NOTES
1. Derate power dissipation linearly 1.67 mW/°C above 25°C.
2. RMA flux is recommended.
3. Methanol or isopropyl alcohols are recommended as
cleaning agents.
NOTES:
1. Dimensions for all drawings are in inches.
2. Tolerance of ± .010 on all non-nominal dimensions
unless otherwise specified.
3. All leads are coplanar within .006”.
4. Housing material is electrically conductive.
ABSOLUTE MAXIMUM RATINGS
Parameter
(Applies to Max Ratings and Characteristics Tables.)
(TA = 25°C unless otherwise specified)
Symbol
Rating
Operating Temperature
TOPR
-40 to +100
Units
°C
Storage Temperature
TSTG
-40 to +100
°C
Preheating Stage for 60 sec
183
°C
Reflow Stage for 5 sec
230
°C
3 to 10
°C/S
50
mA
Soldering Temperature
(Flow)(2,3)
TSOL-F
Rate of Temperature Rise
EMITTER
Continuous Forward Current
IF
Reverse Voltage
VR
5
V
Power Dissipation(1)
PD
100
mW
SENSOR
Collector-Emitter Voltage
VCEO
30
V
Emitter-Collector Voltage
VECO
4
V
PD
100
mW
Power Dissipation(1)
1 of 5
100010F
QCK5
PHOTOTRANSISTOR OPTICAL
INTERRUPTER SWITCH
ELECTRICAL / OPTICAL CHARACTERISTICS
PARAMETER
(TA = 25°C)
TEST CONDITIONS
SYMBOL
MIN
TYP
MAX
UNITS
Forward Voltage
IF = 20 mA
VF
—
—
1.7
V
Reverse Current
VR = 5 V
IR
—
—
100
µA
IF = 20 mA
!PE
—
940
—
nm
Collector-Emitter Breakdown
IC = 1 mA
BVCEO
30
—
—
V
Emitter-Collector Breakdown
IE = 0.1 mA
BVECO
5
—
—
V
VCE = 10 V, IF = 0 mA
ID
—
—
100
nA
Collector Current
IF = 20 mA, VCE = 5 V
IC(ON)
2.0
—
—
mA
Collector Emitter
IF = 20 mA, IC = 0.5 mA
VCE (SAT)
—
—
0.4
V
Rise Time
VCE = 5 V, RL = 100 "
tr
—
8
—
µs
Fall Time
IC = 5 mA
tf
—
50
—
µs
EMITTER
Peak Emission Wavelength
SENSOR
Dark Current
COUPLED
Saturation Voltage
Fig. 1 Forward Voltage vs. Ambient Temperature
Fig. 2 Forward Current vs. Forward Voltage
3
100
TA = 25˚C
IF - Forward Current (mA)
VF - Forward Voltage (V)
IF Pulsed
Pulse Width = 100 µs
Duty Cycle = 0.1%
IF = 100 mA
2
IF = 50 mA
1
IF = 10 mA
IF = 20 mA
80
60
40
20
0
-40
-20
0
20
40
60
80
0
1.0
100
1.1
o
TA - Ambient Temperature ( C)
VCE = 25 V
Rise and Fall Time (µs)
ICEO - Normalized Dark Current
1.5
1.6
100
Normalized to:
VCE = 25 V
TA = 25˚C
VCE = 10 V
102
101
10
tr
VCC= 5 V
IC = 0.5 mA
tpw= 100 us
T = 10 ms
TA = 25˚C
tf
tf
tr
1
100
10-1
40
60
80
o
TA -Ambient Temperature ( C)
2 of 5
1.4
Fig. 4 Rise and Fall Time vs. Load Resistance
Fig. 3 Collector Emitter Dark Current (Normalized)
vs. Ambient Temperature
103
1.3
VF - Forward Voltage (V)
4
10
1.2
100
0.1
10
100
1000
RL-Load Resistance (")
100010F
QCK5
PHOTOTRANSISTOR OPTICAL
INTERRUPTER SWITCH
Fig. 5 Collector Current vs. Forward Current
Fig. 6 Collector Current vs. Collector Emitter Voltage
10
10
1
0.1
0.01
1
10
100
9
8
7
6
IF = 30 mA
5
IF = 20 mA
4
3
2
IC(ON)
IC(ON) - COLLECTOR CURRENT (mA)
IC(ON) - COLLECTOR CURRENT (mA)
Normalized to:
IF = 20 mA
VCE = 5 V
Pulse Width = 100 µs
TA = 25˚C
IF = 10 mA
1
0
0.1
1000
1
IF - FORWARD CURRENT (mA)
Fig. 8 Collector Current vs. Shield Distance
Fig. 7 Collector Current vs. Ambient Temperature
1.000
10
Normalized to:
VCE = 5 V
IF =10 mA
TA = 25˚C
IC(ON) - Normalized Collector Current
IC(ON) - Normalized Collector Current
10
VCE - COLLECTOR EMITTER VOLTAGE (V)
IF = 20 mA
1
IF = 10 mA
IF = 5 mA
Black Shield
+
E
Normalized to
value with shield
removed
d
0
D
+
0.100
Black Shield
d
0
0.010
0.001
0
-40
-20
0
20
40
60
80
100
o
TA-Ambient Temperature ( C)
1
2
3
4
5
6
7
8
9
10
d - Distance (mm)
Fig. 9 Power Dissipation vs. Ambient Temperature (TBD)
3 of 5
100010F
QCK5
PHOTOTRANSISTOR OPTICAL
INTERRUPTER SWITCH
TAPE & REEL DIMENSIONS
Ø1.50 + .01/- 0.0
CATHODE PIN # 1
1.75
DIRECTION OF FEED
ANODE FIRST
4.00
0.40
END
START
11.50
24.00
15.80
9.90
VIEW "A"
NO
COMPONENTS
16.00
COMPONENTS
NO
COMPONENTS
QCK PRODUCT
CARRIER TAPE
TRAILER
12" MIN
LEADER
17" MIN
REEL
7.60
DI
RE
CT
IO
N
O
F
FE
ED
HEAT SEALING TAPE
Ø13 mm
Ø330 mm
STICKER
PIN #1
CARRIER TAPE
QCK PRODUCT
NOTES:
1. QUANTITY PER REEL: 300 UNITS.
2. CARRIER TAPE MATERIAL: HIGH IMPACT POLYSTERINE (CONDUCTIVE BLACK).
3. REEL MATERIAL: HIGH IMPACT STYRENIC ALLOY.
4. TAPE PLACED ON TOP OF UNIT TO AID PICK AND PLACE MACHINE.
5. ALL DIMENSIONS ARE IN MILLIMETERS (UNLESS OTHERWISE SPECIFIED).
4 of 5
100010F
QCK5
PHOTOTRANSISTOR OPTICAL
INTERRUPTER SWITCH
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO
ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME
ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, and (c) whose failure to
perform when properly used in accordance with
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.
www.fairchildsemi.com
5 of 5
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
© 2000 Fairchild Semiconductor Corporation
100010F