SPE6V8UD Ultra Low Capacitance 4 -Line ESD Protection Array DESCRIPTION The SPE6V8UD is 4-channel very low capacitance ESD transient voltage suppressor which provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge. It is particularly well-suited to protect systems with high speed communication lines from ESD, EFT, and lighting. The SPE6V8UD is consists of eight low capacitance steering diodes and a TVS diode in a SLP package. Each channel of SPE6V8UD could safely dissipate ESD strikes of ±15KV air discharge as well as ±8KV contact discharge, meeting the requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the device provides protection for contact discharges to greater than ±15KV. APPLICATIONS Cellular Handsets and Accessories Cordless Phone PDA Notebooks and Handhelds Portable Instrumentation Digital Cameras MP3 Player High Definition Multi-Media Interface Protection USB 2.0 Power and Data Line Monitors and Notebook Computers HDSL, IDSL Secondary IC Side Protection 10/100/1000 Ethernet FEATURES Transient protection for data lines to PIN CONFIGURATION ( DFN-10 ) IEC 61000-4-2 (ESD) ±15kV (air) ±8kV (contact) ( Length = 2.5mm ) IEC 61000-4-4 (EFT) 40A (5/50ns) Protects five bidirectional I/O lines Working voltage: 5V Low leakage current Low operating and clamping voltages Low capacitance: 0.35 pF typical PART MARKING 2009/ 06 / 20 Ver.1 Page 1 SPE6V8UD Ultra Low Capacitance 4 -Line ESD Protection Array ORDERING INFORMATION Part Number Package Part SPE6V8DFN10RGB DFN-10 ※ SPE6V8UDFN10RGB : Tape Reel ; Pb – Free ; Halogen - Free Marking WYW ABSOULTE MAXIMUM RATINGS (TA=25℃ Unless otherwise noted) Parameter Symbol Typical Unit Peak Pulse Power ( tp = 8/20 μs ) Ppk 180 W Maximum Peak Pulse Current ( tp = 8/20 μs ) Ipp 7 A ESD per ICE 61000 – 4 – 2 (Air ) Vpp ±15 KV ESD per ICE 61000 – 4 – 2 (Contact ) Vpp ±8 KV TJ -55 ~ 150 ℃ Storage Temperature Range TSTG -55 ~ 150 ℃ Lead Soldering Temperature TL 260 ( 10sec ) ℃ Operating Junction Temperature ELECTRICAL CHARACTERISTICS (TA=25℃ Unless otherwise noted) Parameter Reverse Stand – Off Voltage Forward Voltage @ IF Reverse Breakdown Voltage Symbol VRWM VF VBR Conditions IF = 10mA It = 1mA Reverse Leakage Current IR VRWM = 5V , T=25℃ Clamping Voltage VC Junction Capacitance Cj Ipp = 1A , tp = 8/20 μs VR = 0V, f = 1MHz Any I/O pin to Ground VR = 0V, f = 1MHz Between I/O pins 2009/ 06 / 20 Ver.1 Min. 0.4 6.0 Typ 0.8 7.0 0.01 0.7 Max. Unit 5 1.5 V V V 1 μA 12 V 1.0 pF 0.35 Page 2 SPE6V8UD Ultra Low Capacitance 4 -Line ESD Protection Array TYPICAL CHARACTERISTICS 2009/ 06 / 20 Ver.1 Page 3 SPE6V8UD Ultra Low Capacitance 4 -Line ESD Protection Array SCHEMATIC & PIN CONFIGURATION As Figure Shown is an example of how to route the high speed differential traces through the SPE6V8UD.The solid line represents the PCB trace. The PCB traces are used to connect the pin pairs for each line (pin 1 to pin 10, pin 2 to pin 9, pin 4 to pin 7, pin 5 to pin 6). For example, line 1 enters at pin 1 and exits at Pin 10 and the PCB trace connects pin 1 and 10 together. This is true for lines connected at pins2, 4, and 5 also. Ground is connected at pins3 and 8. One large ground pad should be used in lieu of two separate pads. Flow through Layout Using SPE6V8UD APPLICATION INFORMATION ( Design Recommendations for HDMI Protection ) Adding external ESD protection to HDMI ports can be challenging. First, ESD protection devices have an inherent junction capacitance. However, adding even a small amount of capacitance will cause the impedance of the differential pair to drop. Second , large packages and land pattern requirements cause discontinuities that adversely affect signal integrity. The SPE6V8UD and is specifically designed for protection of high-speed interfaces such as HDMI. They present <0.4pF capacitance between the pairs while being rated to handle +/-8KV ESD contact discharges (15KVair discharge) as outlined in IEC61000-4-2. Each device is in a leadless DFN package that is less than 1.1mm wide. They are designed such that the traces flow straight through the device. The narrow package and flow-through design reduces discontinuities and minimizes impact on signal integrity. This becomes even more critical as signal speeds increase. 2009/ 06 / 20 Ver.1 Page 4 SPE6V8UD Ultra Low Capacitance 4 -Line ESD Protection Array DFN-10 PACKAGE OUTLINE 2009/ 06 / 20 Ver.1 Page 5 SPE6V8UD Ultra Low Capacitance 4 -Line ESD Protection Array Information provided is alleged to be exact and consistent. SYNC Power Corporation presumes no responsibility for the penalties of use of such information or for any violation of patents or other rights of third parties which may result from its use. No license is granted by allegation or otherwise under any patent or patent rights of SYNC Power Corporation. Conditions mentioned in this publication are subject to change without notice. This publication surpasses and replaces all information previously supplied. SYNC Power Corporation products are not authorized for use as critical components in life support devices or systems without express written approval of SYNC Power Corporation. ©The SYNC Power logo is a registered trademark of SYNC Power Corporation ©2004 SYNC Power Corporation – Printed in Taiwan – All Rights Reserved SYNC Power Corporation 7F-2, No.3-1, Park Street NanKang District (NKSP), Taipei, Taiwan, 115, R.O.C Phone: 886-2-2655-8178 Fax: 886-2-2655-8468 ©http://www.syncpower.com 2009/ 06 / 20 Ver.1 Page 6