SPE5Z5VU Ultra Low Capacitance Single-Line ESD Protection Array DESCRIPTION The SPE5Z5VU is an ESD transient voltage suppression component which provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). It is particularly well-suited for cellular phones, portable device, digital cameras, power supplies and many other portable applications because of its small package and low weight. The SPE5Z5VU is Uni-directional, Safely dissipate ESD strikes of Level 4, IEC61000-4-2, exceeding the maximum requirement. Using the MILSTD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the device provides protection for contact discharges to greater than +/-10KV. The SPE5Z5VU is available in a SOD-523 package with peak reverse working voltage of 5 voltages. APPLICATIONS Cellular Handsets and Accessories Cordless Phone PDA Notebooks and Handhelds Portable Instrumentation Digital Cameras MP3 Player FEATURES Transient protection for data lines to PIN CONFIGURATION ( SOD-523 ) IEC 61000-4-2 (ESD) ±15kV (air) ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) Protects single I/O lines Working voltage: 5V Low leakage current Low operating and clamping voltages PART MARKING Mx M= Month Code x=Specific Device Code 2011/03/09 Ver.2 Page 1 SPE5Z5VU Ultra Low Capacitance Single-Line ESD Protection Array ORDERING INFORMATION Part Number Package Part SPE5Z5VUD52RGB SOD-523 M=Month Code (A~Z) ※ SPE5Z5VUD52RGB : Tape Reel ; Pb – Free ; Halogen – Free Marking Mx ABSOULTE MAXIMUM RATINGS (TA=25℃ Unless otherwise noted) Parameter Symbol Typical Unit Peak Pulse Power ( tp = 8/20 μs ) Ppk 250 W Maximum Peak Pulse Current ( tp = 8/20 μs ) Ipp 7 A ESD per IEC 61000 – 4 – 2 (Air ) Vpp ±15 KV ESD per IEC 61000 – 4 – 2 (Contact ) Vpp ±10 KV TJ -55 ~ 125 ℃ Storage Temperature Range TSTG -55 ~ 150 ℃ Lead Soldering Temperature TL 260 ( 10sec ) ℃ Operating Junction Temperature ELECTRICAL CHARACTERISTICS (TA=25℃ Unless otherwise noted) Parameter Reverse Stand – Off Voltage Reverse Breakdown Voltage Symbol Conditions Min. Typ VRWM VBR It = 1mA Max. Unit 5 V 6 V Reverse Leakage Current IR VRWM = 5V , T=25℃ 1 μA Clamping Voltage VC 8 V Junction Capacitance Cj Ipp = 1A , tp = 8/20 μs Between I/O Pin and GND VR = 0V , f = 1MHz 0.9 pF 2011/03/09 Ver.2 0.5 Page 2 SPE5Z5VU Ultra Low Capacitance Single-Line ESD Protection Array TYPICAL CHARACTERISTICS 2011/03/09 Ver.2 Page 3 SPE5Z5VU Ultra Low Capacitance Single-Line ESD Protection Array SOD-523 PACKAGE OUTLINE 2011/03/09 Ver.2 Page 4 SPE5Z5VU Ultra Low Capacitance Single-Line ESD Protection Array Information provided is alleged to be exact and consistent. SYNC Power Corporation presumes no responsibility for the penalties of use of such information or for any violation of patents or other rights of third parties which may result from its use. No license is granted by allegation or otherwise under any patent or patent rights of SYNC Power Corporation. Conditions mentioned in this publication are subject to change without notice. This publication surpasses and replaces all information previously supplied. SYNC Power Corporation products are not authorized for use as critical components in life support devices or systems without express written approval of SYNC Power Corporation. ©The SYNC Power logo is a registered trademark of SYNC Power Corporation ©2004 SYNC Power Corporation – Printed in Taiwan – All Rights Reserved SYNC Power Corporation 7F-2, No.3-1, Park Street NanKang District (NKSP), Taipei, Taiwan, 115, R.O.C Phone: 886-2-2655-8178 Fax: 886-2-2655-8468 ©http://www.syncpower.com 2011/03/09 Ver.2 Page 5