KBPC3500 - KBPC3510 SILICON BRIDGE RECTIFIERS BR50M PRV : 50 - 1000 Volts Io : 35 Amperes 0.728(18.50) 0.688(17.40) FEATURES : * * * * * * 0.685(16.70 1.130(28.70) 1.120(28.40) ) 0.570(14.50) 0.530(13.40) High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Pb / RoHS Free 0.210(5.30) 0.200(5.10) 0.658(16.70) 0.618(15.70) 0.032(0.81) 0.028(0.71) 0.252(6.40) 0.248(6.30) φ0.100(2.50) 0.090(2.30) 0.905(23.0) 0.826(21.0) MECHANICAL DATA : * * * * * Case : Metal Case Epoxy : UL94V-O rate flame retardant Terminals : plated .25" (6.35 mm). Faston Polarity : Polarity symbols marked on case Mounting position : Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency. * Weight : 17.1 grams 0.310(7.87) 0.280(7.11) Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specifie. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL KBPC 3500 KBPC 3501 KBPC 3502 KBPC 3504 KBPC 3506 KBPC 3508 KBPC 3510 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Current Tc= 55°C IF(AV) 35 A IFSM 400 A It VF 2 660 1.1 AS V IR 10 μA RATING Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) Current Squared Time at t < 8.3 ms. Maximum Forward Voltage per Diode atFI = 17.5 A Maximum DC Reverse Current Ta= 25 °C at Rated DC Blocking Voltage Ta= 100 °C 2 IR(H) 200 μA Typical Thermal Resistance (Note 1) RθJC 1.5 °C/W Typical Thermal Resistance at Junction to Ambient RθJA TJ 10 °C - 40 to + 150 °C TSTG - 40 to + 150 °C Operating Junction Temperature Range Storage Temperature Range Note : 1. Thermal Resistance from junction to case with units mounted on a 7.5" x 3.5" x 4.6" (19cm.x 9cm.x 11.8cm.) Al.-Finned Plate Page 1 of 2 Rev. 03 : August 25, 2005 RATING AND CHARACTERISTIC CURVES ( KBPC3500 - KBPC3510 ) FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 600 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT AMPERES 42 35 28 21 14 HEAT-SINK MOUNTING, Tc 7.5" x 3.5" x 4.6" THK. (19cm x 9cm x 11.8cm) Al.-Finned plate 7 0 0 25 50 75 100 125 150 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 500 T J = 50 °C 400 300 200 100 0 175 1 CASE TEMPERATURE, ( °C) 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER DIODE PER DIODE 100 10 REVERSE CURRENT, MICROAMPERES FORWARD CURRENT, AMPERES T J = 100 °C 10 Pulse Width = 300 μs 1 % Duty Cycle 1.0 1.0 T J = 25 °C 0.1 T J = 25 °C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 03 : August 25, 2005