BR2500M - BR2510M SILICON BRIDGE RECTIFIERS BR50 PRV : 50 - 1000 Volts Io : 25 Amperes 0.728(18.50) 0.688(17.40) FEATURES : * * * * * * High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Pb / RoHS Free 0.685(16.70) 1.130(28.70) 0.618(15.70) 1.120(28.40) 0.570(14.50) 0.530(13.40) 0.210(5.30) 0.200(5.10) 0.658(16.70) 0.618(15.70) 0.032(0.81) 0.028(0.71) MECHANICAL DATA : * * * * * Case : Metal Case Epoxy : UL94V-O rate flame retardant Terminals : plated .25" (6.35 mm). Faston Polarity : Polarity symbols marked on case Mounting position : Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency. * Weight : 17.1 grams 0.252(6.40) 0.248(6.30) φ 0.100(2.50) 0.090(2.30) 0.905(23.0) 0.826(21.0) 0.310(7.87) 0.280(7.11) Metal Heatsink Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL BR2500 BR2501 BR2502 BR2504 BR2506 BR2508 BR2510 M M M M M M M UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Current Tc = 55°C IF(AV) 25 A IFSM 300 A Current Squared Time at t < 8.3 ms. I2 t 375 A2S Maximum Forward Voltage per Diode at IF = 12.5 A VF 1.1 V µA Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) Maximum DC Reverse Current Ta = 25 °C at Rated DC Blocking Voltage Ta = 100 °C Typical Thermal Resistance (Note 1) Operating Junction Temperature Range Storage Temperature Range IR 10 IR(H) 200 µA RθJC 1.45 °C/W TJ - 40 to + 150 °C TSTG - 40 to + 150 °C Notes : 1. Thermal Resistance from junction to case with units mounted on a 5" x 6" x 4.9" (12.8cm.x 15.2cm.x 12.4cm.) Al.-Finned Plate Page 1 of 2 Rev. 02 : March 24, 2005 RATING AND CHARACTERISTIC CURVES ( BR2500 - BR2510M ) FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 300 PEAK FORWARD SURGE CURRENT, AMPERES 25 20 15 10 HEAT-SINK MOUNTING, Tc 5" x 6" x 4.9" THK. (12.8cm x 15.2cm x 12.4cm) Al.-Finned plate 5 0 25 50 75 100 125 150 TJ = 50 °C 200 150 100 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 50 175 1 2 4 6 10 20 40 60 100 CASE TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER DIODE 100 FORWARD CURRENT, AMPERES 250 0 0 REVERSE CURRENT, MICROAMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES 30 10 Pulse Width = 300 µs 1 % Duty Cycle 1.0 TJ = 25 °C 0.1 PER DIODE 10 TJ = 100 °C 1.0 TJ = 25 °C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 24, 2005