MPC8010-MPC8300 PASSIVE DEVICES – MMSM® Capacitors ® TM RoHS COMPLIANT KEY FEATURES DESCRIPTION Low parasitics LP = 0.02nH Typical CP = 0.04pF Typical Surface Mount design Broadband Performance through X-Band Available on Tape & Reel for automated pick & place assembly Small, SOD 323 Footprint RoHS Compliant APPLICATIONS The MPC8000 MMSM® capacitors are used in RF circ uits for dc blocks, capacitive coupling and RF bypass. They are used for fixed capacitive tuning of oscillators, multipliers or filter elements. 1 www.MICROSEMI.com This series of surface mount capacitors utilize new and unique monolithic MMSM® technology. The technology is a package/device integration accomplished at the wafer fabrication level. Since interconnections utilize precision photolithographic techniques rather than wire bonds, parasitic package inductance is tightly controlled. The package parasitics provide smooth non-resonant functionality through X Band. Microsemi utilizes high quality dielectric materials resulting in exceptional Quali ty Factor (Q) and lowest loss. Insertion loss is typically less than 0.2 db over the working frequency range. This series of devices meets RoHS requirements per EU Directive 2002/95/EC. 1- These devices are supplied with gold terminations. APPLICATIONS/BENEFIT S DC Blocks Capacitive coupling RF Bypass Fixed Filter Elements ABSOLUTE MAXIMUM RATINGS AT 25º C (UNLESS OTHERWISE SPECIFIED) Rating Symbol Value Unit Maximum Leakage Current @80% of minimum Rated V B Operating Temperature IR 10 nA TOP -55 to +125 ºC Storage Temperature TSTG -55 to +125 ºC IMPORTANT: For the most current data, consult our website: www.MICROSEMI.com MPC8010 – MPC8300 Specifications are subject to change. Consult factory for latest information . These devices are ESD sensitive and must be handled using ESD precautions. Copyright 2007 Rev. 2010-02-03 Microsemi - RFIS 75 Technology Drive, Lowell, MA. 01851, 978 -442-5600, Fax: 978-937-3748 Page 1 MPC8010-MPC8300 PASSIVE DEVICES – MMSM® Capacitors ® TM RoHS COMPLIANT DEVICE ELECTRICAL PARAMETERS @ 25 C (unless otherwise specified) . VB (V) MPC8010 MPC8020 CT(pF)1 Tolerance (+/-%) 100 1.0 15 100 2.0 10 MPC8050 100 5.0 10 MPC8100 100 10.0 10 MPC8200 100 20.0 10 MPC8300 100 30.0 10 (Min) www.MICROSEMI.com Model Number Notes 1- Capacitance is measured at ƒ = 1 MHz. P AC K AG E ST Y L E 306 SO L D ER P AD L AY O UT MPC8010 – MPC8300 Copyright 2007 Rev. 2010-02-03 Microsemi - RFIS 75 Technology Drive, Lowell, MA. 01851, 978 -442-5600, Fax: 978-937-3748 Page 2