TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Jul, 23, 2002 Product Name: SAW Filter 1960MHz SMD 3.0 mm SQ TST Parts No.: :TA0175A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Bob Chau Approval by: Vincent Lee Date: Jul, 23, 2002 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 1 FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 1960 MHz for Mobile Communication MODEL NO.: TA0175A REV. NO.:2.0 A. MAXIMUM RATING: 1.Input Power Level: 10 dBm 2.DC voltage: 0 V RoHS Compliant Lead free Lead-free soldering 3.Operating Temperature: -30°C to +80°C 4.Storage Temperature: -40°C to +85°C B. ELECTRICAL CHARACTERISTICS: Item Center frequency Fc Insertion loss within 1930 ~1990 MHz IL Amplitude ripple (p-p) within 1930 ~ 1990 MHz Attenuation (Reference level from 0 dB) D.C. ~ 1850 MHz 1850 ~ 1910 MHz 2010 ~ 2040 MHz 2040 ~ 2070 MHz Min. Typ. Max. (dB) (dB) (dB) - 1960 2.35 1.4 4 2.4 (dB) (dB) (dB) (dB) 20.0 10.0 4.5 20.0 22.0 - 32.0 21.0 10.0 50.0 29.0 1.7 50 50 2.4 - 2070 ~ 5000 MHz (dB) VSWR within 1930 ~1990 MHz Source impedance Zs (Ω) Load impedance ZL (Ω) Note1. No matching network required for operation at 50 Ω TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics : Transfer function TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Reflections Functions : S11 VSWR S22 VSWR TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. MEASUREMENT CIRCUIT: HP Network analyzer 50Ω B SAW Filter E 50Ω A,C,D,F E.OUTLINE DRAWING: A L T TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 F. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION AL T Note 1 Note : 1. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. TAI-SAW TECHNOLOGY CO., LTD. 6