TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW Filter 881.5MHz TST Parts No.:TA0233A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Elvis Chiu Approval by: Francis Chen Date: 2002/07/25 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 881.5 MHz MODEL NO.: TA0233A REV. NO.:3 A. MAXIMUM RATING: 1.Input Power Level: 10 dBm 2.DC voltage: 0 V RoHS Compliant Lead free Lead-free soldering 3.Operating Temperature: -30°C to +85°C 4.Storage Temperature: -40°C to +85°C B. ELECTRICAL CHARACTERISTICS: Item Center frequency Fc Insertion loss 869 ~ 894 MHz IL Amplitude ripple 869 ~ 894 MHz Attenuation (Reference level from 0 dB) D.C. ~ 824 MHz 824 ~ 849 MHz 970 ~ 997 MHz 997 ~ 1150 MHz 1150 ~ 1500 MHz 1500 ~ 2000 MHz 2000 ~ 3000 MHz VSWR 869 ~894 MHz Source impedance Zs Load impedance ZL Min. Typical Max. MHz (dB) (dB) - 881.5 2.3 0.8 3.0 1.5 (dB) (dB) (dB) (dB) (dB) (dB) (dB) 40 35 35 40 30 25 20 - 50 47 64 60 51 41 27 1.6 50 50 - (Ω) (Ω) 2.0 - Note1. No matching network required for operation at 50 Ω TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 2 - C. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - D.Reflections Functions : S11: S22: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - E. MEASUREMENT CIRCUIT: HP Network analyzer 50Ω B SAW Filter E 50Ω A,C,D,F E.OUTLINE DRAWING: ◇ E □ Y #B : Input #E : Output #A,C,D,F : Ground ◇ : Year Code □ : Date Code Unit: mm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 - F. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION EY ◇□ Note : 1. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 6 -