TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW Filter 1150MHz SMD 3.0×3.0mm TST Parts No.:TA0314A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Elvis Chiu Approval by: Francis Chen Date: 2003/11/14 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 1150 MHz MODEL NO.: TA0314A REV. NO.:1 A. MAXIMUM RATING: 1.Input Power Level: 10 dBm 2.DC voltage: 5V 3.Operating Temperature: -10°C to +85°C 4.Storage Temperature: -40°C to +85°C RoHS Compliant Lead free Lead-free soldering B. ELECTRICAL CHARACTERISTICS: Balanced to balanced operation Terminating source impedance: Terminating load impedance: ZS=100Ω ZL=100Ω Item Center frequency Unit Fc Insertion Loss 1142~1158 MHz ILmin (reference level) MHz Min. - Type. 1150 Max. - dB - 2.5 5.0 Ripple 1145~1155MHz dB - 0.6 - Ripple 1142~1158MHz dB - 0.7 2.0 (at 1150MHz) ns 38 80 Group Delay Variation 1142~1158MHz ns 12 90 Absolute Group Delay Attenuation:(Reference level from ILmin ) 500 ~ 1118 MHz dB 35 42 - 1118 ~ 1128 MHz dB 4 20 - 1180 ~ 1220 MHz dB 20 24 - 1220 ~ 1600 MHz dB 35 40 - Note: ILmin is the minimum of the pass band attenuation. The center frequency Fc is the mean value of the upper and lower frequencies at the 2dB filter attenuation level relative to the ILmin. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics : Transfer Function TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Wideband Group Delay TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. MEASUREMENT CIRCUIT: Banance impedance 100 ohm Balance impedance 100ohm E.OUTLINE DRAWING: N L ◇□ Pin 1,2 : Balanced Input Pin 5,6 : Balanced Output P3,4,7,8 : Ground ◇ : Year Code □ : Date Code Unit : mm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 F. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION NL ◇□ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6