TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW Filter 611MHz SMD 9.1×7.1mm TST Parts No.:TA0326A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Bob Chau Approval by: Francis Chen Date: 2006/08/22 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 611 MHz MODEL NO.: TA0326A REV.NO.:4 A. MAXIMUM RATING: 1.Input Power Level: 10 dBm 2.DC voltage: 3 V RoHS Compliant Lead free Lead-free soldering 3.Operating Temperature: -20°C to +70°C 4.Storage Temperature: -40°C to +85°C B. ELECTRICAL CHARACTERISTICS: Item Unit Center frequency Fc Insertion Loss ILmin (reference level) 3dB Bandwidth BW-3dB 40dB Bandwidth BW-40dB Amplitude Ripple 609.5~ 612.5 MHz Min. - Type. 611 Max. - dB - 2.95 4.5 MHz 7 9.8 - - 20.5 24 MHz dB - 0.4 1.3 Rejection:(Reference level from 0dB) 520 to 560 MHz dB 38 44 - 660 to 700 MHz dB 38 45 - Source impedance Zs Ω - 50 - Load impedance ZL Ω - 50 - Note: ILmin is the minimum of the pass band attenuation. The center frequency Fc is the mean value of the upper and lower frequencies at the 3dB filter attenuation level relative to the ILmin. TAI-SAW TECHNOLOGY CO., LTD. 2 TST DCC Release document C. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. 3 TST DCC Release document D. MEASUREMENT CIRCUIT: HP Network analyzer 50Ω 1 SAW Filter 50Ω 6 2,3,4,5,7,8,9,10 E.OUTLINE DRAWING: 3 2 6 T A □ #1: Input #6: Output #2,3,4,5,7,8,9,10: Ground Product Year Code Year Product Code 2001 2002 2003 2005 2006 2007 A a A 2004 2008 □ : Date Code Unit: mm a TAI-SAW TECHNOLOGY CO., LTD. 4 TST DCC Release document F. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION 326 TA□ Direction of Feed TAI-SAW TECHNOLOGY CO., LTD. 5 TST DCC Release document 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. 6 TST DCC Release document