TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW Filter 184MHz SMD 7.0×5.0 mm TST Parts No.:TA0378A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Asin Lin Approval by: Francis Chen Date: 2003/08/20 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 184 MHz MODEL NO.: TA0378A REV. NO.:1 A. MAXIMUM RATING: 1.Input Power Level: 10 dBm 2.DC voltage: 5 V RoHS Compliant Lead free Lead-free soldering 3.Operating Temperature: -10°C to +70°C 4.Storage Temperature: -40°C to +85°C B. ELECTRICAL CHARACTERISTICS: Item Unit Center Frequency Fc Insertion Loss ILmin (reference level) Bandwidth BW-3dB Absolute Attenuation(reference to ILmindB) Fc-50 ~ Fc-30 Fc-30 ~ Fc-15 Fc+30 ~ Fc+50 Source impedance Load impedance MHz MHz MHz Zs ZL Specification Min. Typ. Max. MHz dB MHz 6 184 1.6 10 2.8 - dB dB dB Ω Ω 42 36 42 - 54 52 51 50 50 - Note: ILmin is the minimum of the pass band attenuation. The center frequency Fc is the mean value of the upper and lower frequencies at the 3dB filter attenuation level relative to the ILmin. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 D. MEASUREMENT CIRCUIT: HP Network analyzer 50Ω 7 SAW Filter 2 50Ω 1,3,4,5,6,8,9,10 E.OUTLINE DRAWING: F.PCB FOOTPRINT: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 G. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION 378 T A□ Direction of Feed TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5