TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Sep, 12, 2007 Product Name: SAW Filter 1586.36 MHz SMD 3.0X3.0 mm TST Parts No.: TA0699A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Bob Chau Approval by: Francis Chen Date: 9, 12, 2007 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 1586.36 MHz MODEL NO.:TA0699A REV. NO.:2 A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC Voltage : 3V 3. Operating Temperature: -40°C to +85°C 4. Storage Temperature: -50°C to +95°C RoHS Compliant Lead free Lead-free soldering B. ELECTRICAL CHARACTERISTICS: Terminating source impedance (differential) : Terminating load impedance (differential) : Item Zs = 150 Ω // 33 nH ZL = 150 Ω // 33 nH Unit MHz Min. - Type. 1586.36 Max. - Note - MHz 40 59 - - dB - 2.7 5 - Amplitude ripple (1566.36 MHz ~ 1606.36 MHz) dB - 1 2 - Phase error (1566.36 MHz ~ 1606.36 MHz) (3) - 3.5 6 - - 2.1 2.5 - Center Frequency Fc Bandwidth at –2 dB Insertion Loss in 1566.36~1606.36 MHz deg I/O VSWR (1566.36 MHz ~ 1606.36 MHz) Attenuation (1) 50 ~ 1504.3 MHz dB 46 50 - - 1668.42 ~ 1810.5 MHz dB 46 53 - - 1810.5 ~ 4250 dB 35 41 - - MHz 4250 ~ 6000 MHz dB 30 38 Notes : (1) The amplitude reference is insertion loss at Fc. (2) The amplitude ripple is defined as the max. level – min. level over any 30 MHz block of the given bandwidth. (3) The phase error is measured over any 30 MHz block of the given bandwidth. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C.OUTLINE DRAWING: G △ 4 □ Z H A, B : Balance Input D, E : Balance Output C,F,G,H : Ground Unit : mm △ : Year Code (2006->6, …, 2009->9) □ : Date Code (Follow the table from planner each year) D. MEASUREMENT CIRCUIT: 33nH 150Ω 150Ω 33nH TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 E. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 Reflection Functions : S11 S22 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 G. PACKING: 1. REEL DIMENSION (Reel Count : 7”=1000 ; 13”=3000 ) 2.TAPE DIMENSION 4 Z △ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8