TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: March, 7, 2005 Product Name: SAW Filter 930.5 MHz for Pager TST Parts No.:TA930GC Customer Parts No.: Company: Division: Approved by : Date: Checked by: Bob Chau Approval by: Francis Chen Date: 3, 7, 2005 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 930.5 MHz For Pager MODEL NO.: TA930GC REV. NO.:4 A. MAXIMUM RATING: 1.Input Power Level: 0 dBm RoHS Compliant Lead free Lead-free soldering 2.DC voltage: 10 V 3.Operating Temperature: -30°C to +70°C 4.Storage Temperature: -40°C to +85°C B. ELECTRICAL CHARACTERISTICS: Characteristics Center frequency FC I.L. (928.5~ 932.5 MHz) Ripple(928.5 ~ 932.5 MHz) Attenuation:( Reference level from 0 dB) 1) 400 ~ 880 MHz 2) 884.8 ~ 890.2 MHz 3) 906.8 ~ 911.2 MHz 4) 980 ~ 1300 MHz Impedance at Specification Note (MHz) (dB) (dB) 930.5 4.5 max. 2.0 max. 1 1 (dB) (dB) (dB) (dB) 35 min. 40 min. 30 min. 35 min. 1 1 1 1 50-j57ohm 50-j57ohm 2 2 FC : Input Impedance Output Impedance Note1. The standard definitions is in JIS C 6703 Note2. Source im pedance 50Ω Load im pedance 50Ω Z IN =50-j57ohm Z O UT =50-j57ohm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. FREQUENCY CHARACTERISTICS: TA930GC 0 -10 Att.(dB) -20 -30 -40 -50 -60 -70 830.5 850.5 870.5 890.5 910.5 930.5 950.5 970.5 990.5 1010.5 1030.5 Freq.(MHz) TA930GC 0 -2 -4 -6 Att.(dB) -8 -10 -12 -14 -16 -18 -20 915 917 919 921 923 925 927 929 931 933 935 937 939 941 943 Freq.(MHz) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 D. MEASUREMENT CIRCUIT: HP Network analyzer 50Ω B SAW Filter 50Ω E 10nH 10nH A,C,D,F E.OUTLINE DRAWING: T TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. PACKING: 1. REEL DIMENSION 930 TG 2. TAPE DIMENSION Direction of Feed TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6