TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: 2004/07/30 Product Name: SAW Filter 163 MHz TST Parts No.: TA0168A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Asin Lin Approval by: Francis Chen Date: 2004/07/30 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 1 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 163 MHz MODEL NO.: TA0168A Rev. No.:2 A. MAXIMUM RATING: 1. Input Power Level: 0 dBm 2. DC voltage: 10 V RoHS Compliant Lead free Lead-free soldering 3. Operating Temperature: -10°C to +50°C 4. Storage Temperature: -40°C to +85°C B. ELECTRICAL SPECIFICATION: Characteristics Specification Note 163 6.5 Max. 2.1 Max. 1 1 50 Min. 42 Min. 1 390 Ω // 300 pF 1164 Ω // 374 pF 2 2 Center frequency, FC (MHz) Insertion Loss, I.L. (Within FC± 4 MHz) (dB) Amplitude Ripple, A.R. (Within FC± 4 MHz) (dB) Attenuation: (Reference level from 0 dB) (dB) FC - 100MHz to -38.8MHz (dB) FC +38.8MHz to + 100MHz (dB) Impedance at FC ; Input ZIN =RIN//CIN Output ZOUT =ROUT//COUT Note1. The standard definitions is in JIS C 6703 Note2. Source im pedance Load im pedance 50Ω 50Ω Z IN =390Ω // 300pF Z OUT =1164Ω // 374pF TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C.FREQUENCY CHRACTERISTICS: TA0168A 0 -2 -4 Att.(dB) -6 -8 -10 -12 -14 -16 -18 -20 169 171 173 193 203 213 167 165 163 161 159 157 155 153 Freq.(MHz) TA0168A 0 -8 -16 Att. (dB) -24 -32 -40 -48 -56 -64 -72 -80 183 173 163 153 143 133 123 113 Freq. (MHz) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 D. MEASUREMENT CIRCUIT: C1 = 12 pF L1 = 47 nH C2 = 8 pF L2 = 47 nH E.OUTLINE DRAWING: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5