TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW Filter 40MHz SMD 7.0×5.0 mm TST Parts No.:TB0318A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Andy Lee Approval by: Francis Chen Date: 2005/08/12 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-03S06-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 40 MHz MODEL NO.: TB0318A REV. NO.:1 A. MAXIMUM RATING: 1.Input Power Level: 10 dBm 2.DC voltage: 5 V RoHS Compliant Lead free Lead-free soldering 3.Operating Temperature: -20°C to +85°C 4.Storage Temperature: -40°C to +85°C B. ELECTRICAL CHARACTERISTICS: Item Center Frequency Fc Insertion Loss ILmindB 3dB Bandwidth Passband Ripple (Fc-1.75MHz~Fc+1.75MHz) Group Delay Ripple (Fc-1.75MHz~Fc+1.75MHz) Stopband Attenuation(reference to ILmindB) Fc±5MHz 27.5~32.5MHz 47.5~52.5MHz 0~30 MHz 50~70 MHz Unit Specification Min. Typ. Max. MHz dB MHz 3.5 40 9.0 5.0 12.0 - dB 1.2 2.0 nS 190 250 35 42 42 71 43 - dB dB dB dB dB 20 31 31 35 35 Note: ILmin is the minimum of the pass band attenuation. The center frequency Fc is the mean value of the upper and lower frequencies at the 3dB filter attenuation level relative to the ILmin. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 D. MEASUREMENT CIRCUIT: E.OUTLINE DRAWING: 3 1 8 T B □ Pin configuration: 4: RF Input or Balance Input 5: RF Input Ground or Balance Input Return 9: RF Output or Balance Output 10: RF Output Ground or Balance Output Return 1,2,3,6,7,8: Ground □ : Date Code TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. PCB FOOTPRINT: G. PACKING: 1. REEL DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 2. TAPE DIMENSION 318 T B□ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6