TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com IF SAW Filter 140 MHz SMD 13.3mmX6.5mm MODEL NO.: TB0559A Rev. No. V2.0 A. Maximum Rating: 0. Maximum Input Power: 10dBm RoHS Compliant Lead free Lead-free soldering 1.Operating Temperature: -40 °C ~ +85 °C 2. Storage Temperature: -40 °C ~ +85 °C B. Characteristics : 1. Ambient Temperature: 25 ° Characteristics Min. Center frequency FC MHz Maximum Insertion loss I.L. dB 1dB Bandwidth MHz 18.4 3dB Bandwidth MHz 20.0 35dB Bandwidth MHz Passband Ripple (within 130.9~149.1MHz) dB Group Delay Ripple (within 130.9~149.1MHz) nS Absolute Group Delay uS Input VSWR (within 130.9~149.1MHz) dB Output VSWR (within 130.9~149.1MHz) dB Temp Coefficient ppm/° C Attenuation:( Reference level from minimum insertion loss) 1) 10 MHz~ 90 MHz dB 35 2) 190 MHz~120MHz dB 40 3) 120MHz ~ 126.8 MHz dB 35 4) 154.7MHz ~ 160MHz dB 35 5) 160MHz ~ 190 MHz dB 40 6) 190MHz ~800MHz dB 35 TAI-SAW TECHNOLOGY CO., LTD. Value Typ. Max. Note 140.0 - 9.2 20.8 21.8 25.5 0.75 10.5 26.4 1.00 - 115 150 - 1.05 2.0 1.7 -93 2.5 2.3 - - 62 54 42 45 43 62 - - TST DCC Release document - 2 - C. Outline Drawing: Pin configuration #K RF Input #L RF Input ground #E RF Output #F RF Output ground #A, B, C, D, G, H, I, J To be ground □ : Week Code (Follow the table from planner each year) △ : Product / Year Code Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - D. Frequency Characteristics : 1. S21 Response Fig. 1 S21 Response Horizontal: 10MHz/Div; Vertical: 10dB/Div 2. Pass band Ripple Fig. 2 Inband ripple Horizontal: 3MHz/Div; Vertical: 2dB/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - 3. Group Delay Ripple Fig. 3 Group Delay Horizontal: 3MHz/Div; Vertical: 200nS/Div 3. Wide band Response Fig. 3 Wide Band Horizontal: 10~800MHz; Vertical: 10dB/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 - E. Measurement Circuits : L1 Zin C1 K L2 E SAW Filter C2 Zout Zin=Zout= 50 ohm L1=92nH, C1=22pF, L2=92nH, C2=33pF Note: The matching structure will change according to different test fixture. F. PCB Footprint TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 6 - G. Package: (1). REEL DIMENSION (2). TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 7 - 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. Recommended Reflow Profile : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 8 -