TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 350 MHz SMD 5.0mmX5.0mm MODEL NO.: TB0706A preliminary A. MAXIMUM RATING: RoHS Compliant Lead free Lead-free soldering 1. Operating Temperature: -25°C to +70°C 2. Storage Temperature: -40°C to +85°C 3. Maximum Input Power : 10dBm B. ELECTRICAL CHARACTERISTICS: 1. Ambient Temperature: 25 ° Item Min. Typical Max. MHz - 350 - dB - 14.6 18 Bandwidth at –1.5dB MHz 31.0 35.1 - Bandwidth at –6.0dB MHz - 41.4 43.0 Bandwidth at –25.0dB MhZ 48.0 50.0 Center frequency Fc Insertion loss at Fc Amplitude Ripple (Fc ± 15.0 MHz) dB - 1.1 1.4 Group Delay Ripple (Fc ± 15.0 MHz) nS - 30 100 - 320 - - -18 - Absolute Group delay at Fc Temp Coefficient nS ppm/° C TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. FREQUENCY CHARACTERISTICS : 1.S21 wide-band Response:(span 400MHz) Fig1. Horizontal: 40MHz/Div 2.S21 pass-band Response:(span 60MHz) Fig2. Horizontal: 6MHz/Div Vertical: Vertical: TAI-SAW TECHNOLOGY CO., LTD. 10dB/Div 1dB/Div TST DCC Release document 3 3.S11 Smith-Chart: (span 400MHz) 4.S22 Smith-Chart:(span 400MHz) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. MEASUREMENT CIRCUIT 1. Single ended input 50 ohm to Single ended Output 50 ohm L1 Zin A C2 E SAW Filter C1 L2 Zout C1=30pF, L1=6.8nH, C2=10pF, L2=5.6nH E.OUTLINE DRAWING: 706 Pin A : RF Input Pin E : RF Output Pin B,C,D,F,G,H : Ground Unit: mm □ : Week Code (Follow the table from planner each year) △ : Product / Year Code Year 2005 2009 2006 2010 2007 2011 TAI-SAW TECHNOLOGY CO., LTD. 2008 2012 TST DCC Release document 5 Product Code B b B b F. PCB Footprint Unit: mm G. PACKING: 1. REEL DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 2. TAPE DIMENSION Unit: mm 706 706 Unit: mm 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7