TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 140MHz (SMD 13.3×6.5x1.65 mm) Model No.: TB0746A Rev. No.:1.0 A. MAXIMUM RATING: 1.Input Power Level: 10 dBm RoHS Compliant Lead free Lead-free soldering 2. Operating Temperature: -20°C to +80°C 3. Storage Temperature: -40°C to +85°C B. Characteristics : Ambient Temperature: 25 °C Characteristics Min. Center frequency FC Minimum Insertion loss I.L. 1dB BW 3dB BW 35dB BW Passband Ripple (80% of 3dB BW) MHz dB MHz MHz MHz dB Phase Linearity (80% of 3dB BW) - Value Typ. Max. - Note 30.0 32.0 - 140.0 11.3 33.0 35.0 42.4 0.6 13.0 44.0 1.2 - deg - 5.0 14 - Delay Variation (80% of 3dB BW) nsec - 50 120 - Absolute Delay usec - 0.55 YZ-LiNbO3 -94 - - Substrate Material Temp Coefficient ppm/K Matching: 1.The input of the filter will be matched to 50 ohm 2.The output of the filter will be matched to 50 ohm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 2 C. Frequency Characteristics : (1) wide band Response:(span 200MHz) (2) Pass band Response and Group Delay Variation: (span 40MHz) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 (3) S11 Smith-Chart: (span 200MHz) (4) S22 Smith-Chart: (span 200MHz) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. Outline Drawing: 746 Pin K : RF Input Pin E : RF Output Pin A,B,C,D,F,G,H,I,J,L : Ground Unit: mm □ : Week Code (Follow the table from planner each year) △ : Product / Year Code Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b E. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 F. Matching Circuit: L1 Zin L2 K E SAW Filter L3 Zout Zin= Zout=50 ohm L1= 10nH, L2=27nH, L3=68nH G. Packing: (1). REEL DIMENSION: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 (2). TYPE DIMENSION: 746 746 H. Recommended Reflow Profile: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7