General Purpose Rectifiers Standard Recovery Plastic Silicon Rectifiers AXIAL LEAD DO-41 Specification Features: Case: Epoxy, Molded Weight: 0.4 gram (approximately) Finish: All External Surfaces Corrosion Resistant And Terminal Leads Are 1N4001 KEL DEVICE MARKING DIAGRAM Readily Solderable Lead And Mounting Surface Temperature For Soldering Purposed: 260℃ Max. For 10 Seconds 1.16 Inch From Case RoHS Compliant 1N4001 : Device Name 1N4001~1N4007 Low Reverse Leakage, High Forward Surge Capability KEL : KEL Logo Cathode Indicated By Polarity Band Absolute Maximum Ratings Parameter Maximum Repetitive Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectifier Current. (0.375” Lead Length @ TA=75℃) Non-repetitive Peak Forward Surge Current. (8.3mS Single Half Sine-wave) Operating Junction and Storage Temperature Range Thermal Resistance (Junction to Ambient) Electrical Characteristics Parameter TA = 25°C unless otherwise noted Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Units VRRM 50 100 200 400 600 800 1000 V VR 50 100 200 400 600 800 1000 V IF(AV) 1.0 A IFSM 30 A TJ, TSTG -65 to +175 °C RθJA 65 °C/W TA = 25°C unless otherwise noted Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Units Reverse Current @VR IR 5 uA Forward Voltage @1A VF 1.1 V CT 15 pF Total Capacitance @VR=4V, f=1MHz August 2007 Release / A Page 1 1N4001 through 1N4007 Series P rel iminary Data She et P rel iminary Data She et Package Outline Package Case Outline D C A B DO-41 DO-41 DIM Millimeters Inches Min Max Min Max A --- 0.86 --- 0.034 B --- 5.20 --- 0.205 C 25.40 --- 1.000 --- D --- 2.71 --- 0.107 This datasheet presents technical data of Tak Cheong’s Silicon Rectifier Diodes. Complete specifications for the individual devices are provided in the form of datasheets. A comprehensive Selector Guide is included to simplify the task of choosing the best set of components required for a specific application. For additional information, please visit our website http://www.takcheong.com. Although information in this datasheet has been carefully checked, no responsibility for the inaccuracies can be assumed by Tak Cheong. Please consult your nearest Tak Cheong’s sales office for further assistance. Tak Cheong reserves the right to make changes without further notice to any products herein to further improve reliability, function or design, cost and productivity. is registered trademarks of Tak Cheong Electronics (Holdings) Co., Ltd. August 2007 Release / A Page 2