TENSILITY 10

part number: 10-00116
description: Cable, 2000 mm, 50-00010 right angle
locking dc plug to stripped/tinned, 18 AWG,
UL2468
date:
unit:
page:
rev:
05/28/09
mm
1 of 3
A
Specifications:
plug description (1)
Ø2.1 x 5.5 x 30 ± 0.5, black insulator, P/N 50-00010
plug overmold (2)
30P, PVC, black
cable description (3)
UL2468, 0.16 x 41 strands, twin wire
cable outer diameter
4.4 (2.2 x 2) ± 0.1
cable color
black
cable gauge
AWG #18
cable length
2000 ± 50
twist tie (4)
black, 89 ± 3
shrink tube (5)
Ø4.0, 10 ± 2
shrink tube (6)
Ø2.0, 30 ± 5
rated load
12 Vdc @ 5 A
Notes:
Function test: no open, no reversed polarity, no short circuit, no INT
Hi-POT test: 600 Vac, 0.5 mA, 1 sec.
RoHS compliant
Mechanical drawing:
Initial
Date
29033 Avenue Sherman Ste 203 Valencia, CA 91355
tolerance
X: ±0.5 mm
.X: ±0.3 mm
ph 661.702.0035 fx 661.702.0038
.XX: ±0.05 mm
www.tensility.com
part number: 10-00116
description: Cable, 2000 mm, 50-00010 right angle
locking dc plug to stripped/tinned, 18 AWG,
UL2468
date:
unit:
page:
rev:
05/28/09
mm
2 of 3
A
Cable specifications:
conductors
gauge
18 AWG
material
brass copper
cord size
41/0.16 BC
jacket
material
F0068C 48PB (4026)
color
black
diameter
Ø4.4 (2.2 x 2) ± 0.10
electrical & physical properties
rated voltage
300 V
rated temperature
80 °C
insulation resistance
0.76 (15.6 °C) mΩ / m min.
resistance @ 20 °C
21.8 mΩ/m max
spark test
5.0 KV
material
unaged
aging test
insulation
tensile strength (kfg/mm min)
1.05
elongation (%min)
100
2
condition
113°C/168 h
elongation (% unaged min)
65
tensile strength (% unaged min)
75
deformation (121± 1 °C x 1 hour)
≤50%
cold bend (-10 ± 1 °C x 1 hour)
OK
heat shock (121 ± 1 °C x 1 hour)
OK
flame test
VW-1
Cable cross section:
conductor
PVC insulation
29033 Avenue Sherman Ste 203 Valencia, CA 91355
ph 661.702.0035 fx 661.702.0038
www.tensility.com
part number: 10-00116
description: Cable, 2000 mm, 50-00010 right angle
locking dc plug to stripped/tinned, 18 AWG,
UL2468
date:
unit:
page:
rev:
05/28/09
mm
3 of 3
A
Revision notes:
Rev
Date
Description
A
May 28, 2009
initial release
Specification Approval
Spec sign-off verifies that you have reviewed the entire specification, tested a sample of the product, and
confirm that it meets your requirements. This specification reflects the part as it will be ordered. Orders
will not be processed until the specification pages have been initialed and the approval page has been
signed. This specification is confidential and is not to be transmitted without prior approval from Tensility.
Signature
Title
Name
Date
29033 Avenue Sherman Ste 203 Valencia, CA 91355
ph 661.702.0035 fx 661.702.0038
www.tensility.com