part number: 10-00117 description: Cable, 2000 mm, 50-00011 locking dc plug to 50-00011 locking dc plug, 18 AWG, UL1185, shielded date: unit: page: rev: 05/28/09 mm 1 of 3 A Specifications: plug description (1) Ø2.50 x 5.5 x 30 ± 0.5, black insulator, P/N 50-00011 plug overmold (2) 30P, PVC, black cable description (3) UL1185, 0.16 x 41 strands, shield wire, 1F cable outer diameter Ø3.4 ± 0.1 cable color black cable gauge AWG #18 cable length 2000 ± 50 twist tie (4) black, 89 ± 3, non-toxic rated load 12 Vdc @ 5 A Notes: Function test: no open, no reversed polarity, no short circuit, no INT Hi-POT test: 600 Vac, 0.5 mA, 1 sec. RoHS compliant Mechanical drawing: Initial Date 29033 Avenue Sherman Ste 203 Valencia, CA 91355 tolerance X: ±0.5 mm .X: ±0.3 mm ph 661.702.0035 fx 661.702.0038 .XX: ±0.05 mm www.tensility.com part number: 10-00117 description: Cable, 2000 mm, 50-00011 locking dc plug to 50-00011 locking dc plug, 18 AWG, UL1185, shielded date: unit: page: rev: 05/28/09 mm 2 of 3 A Cable specifications: conductors gauge 18 AWG material brass copper cord size 41/0.16 TC insulation material F0040C 50PB (4370) UL 80°C color white diameter Ø1.60 ± 0.05 jacket material F0208C 60P (4026) UL 80°C color black diameter Ø3.4 ± 0.10 electrical & physical properties spiral shield 41/0.16 TC rated voltage 300 V rated temperature 80 °C insulation resistance 0.76 (15.6 °C) mΩ / m min. resistance @ 20 °C 21.8 mΩ/m max material insulation jacket tensile strength (kfg/mm2 min) 1.05 1.05 elongation (%min) 100 100 condition 113°C/168 h 113°C/168 h elongation (% unaged min) 65 65 tensile strength (% unaged min) 75 75 deformation (121± 1 °C x 1 hour) ≤50% ≤50% cold bend (-10 ± 1 °C x 1 hour) OK OK heat shock (121 ± 1 °C x 1 hour) OK OK flame test VW-1 VW-1 unaged aging test Cable cross section: conductor insulation shield PVC jacket 29033 Avenue Sherman Ste 203 Valencia, CA 91355 ph 661.702.0035 fx 661.702.0038 www.tensility.com part number: 10-00117 description: Cable, 2000 mm, 50-00011 locking dc plug to 50-00011 locking dc plug, 18 AWG, UL1185, shielded date: unit: page: rev: 05/28/09 mm 3 of 3 A Revision notes: Rev Date Description A May 28, 2009 initial release Specification Approval Spec sign-off verifies that you have reviewed the entire specification, tested a sample of the product, and confirm that it meets your requirements. This specification reflects the part as it will be ordered. Orders will not be processed until the specification pages have been initialed and the approval page has been signed. This specification is confidential and is not to be transmitted without prior approval from Tensility. Signature Title Name Date 29033 Avenue Sherman Ste 203 Valencia, CA 91355 ph 661.702.0035 fx 661.702.0038 www.tensility.com