DC/DC Converters TMR 3WI Series, 3 Watt pending Features ◆ Highest power density in SIP package ◆ Ultra wide 4:1 input range ◆ Small footprint: 21.8 x 9.2 mm ◆ Temperature range –40° to +85°C ◆ High efficiency up to 81% ◆ Excellent load and line regulation ◆ Short-circuit protection ◆ I/O isolation 1500 VDC ◆ Remote On/Off control ◆ 3-year product warranty The TMR-3WI series is a new family of isolated 3W DC/DC converters with regulated output, featuring ultra-wide 4:1 input voltage range. The product comes in a ultra-compact SIP plastic package with a small footprint occupying only 2.0 cm2 (0.3 square in.) of board space. An excellent efficiency allows –40° to +85°C operation temperatures. Further features include remote On/Off control and continuous short circuit protection. The very compact dimensions of these converters make them an ideal solution for many space critical applications in battery-powered equipment and instrumentation. Models Order code TMR 3-1210WI TMR 3-1211WI TMR 3-1212WI TMR 3-1213WI TMR 3-1221WI TMR 3-1222WI TMR 3-1223WI TMR 3-2410WI TMR 3-2411WI TMR 3-2412WI TMR 3-2413WI TMR 3-2421WI TMR 3-2422WI TMR 3-2423WI TMR 3-4810WI TMR 3-4811WI TMR 3-4812WI TMR 3-4813WI TMR 3-4821WI TMR 3-4822WI TMR 3-4823WI http://www.tracopower.com Input voltage 4.5 – 18 VDC (12 VDC nominal) 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC Output current max. 700 mA 600 mA 250 mA 200 mA ± 300 mA ± 125 mA ± 100 mA 700 mA 600 mA 250 mA 200 mA ± 300 mA ± 125 mA ± 100 mA 700 mA 600 mA 250 mA 200 mA ± 300 mA ± 125 mA ± 100 mA Efficiency typ. 74 % 78 % 80 % 80 % 80 % 80 % 80 % 75 % 80 % 81 % 81 % 79 % 80 % 81 % 74 % 79 % 79 % 79 % 79 % 79 % 80 % Page 1 of 3 DC/DC Converters TMR 3WI Series 3 Watt Input Specifications Input current at full load 12 Vin models: 340 mA max. 24 Vin models: 170 mA max. 48 Vin models: 85 mA max. Input current at no load 12 Vin models: 40 mA max. 24 Vin models: 25 mA typ. 48 Vin models: 15 mA typ. Surge voltage (100 msec. max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Input filter inernal capacitor ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / Surge EN 61000-4-4, ± 2 kV, perf. criteria A EN 61000-4-5, ± 1 kV perf. criteria A With external input capacitor e.g. Nippon chemi-con KY 100 µF, 100 V, ESR 110 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±1 % max Regulation – Input variation Vin min. to Vin max. 0.2 % max. – Load variation 0 – 100% single output models: 1.0 % max. dual output models: 1.0 % max. balanced load – Load cross regulation 25/100% 5.0 % max. (dual output models) Minimum load not required Temperature coefficient 0.02 %/K Ripple and noise (20 MHz Bandwidth) 30 mVpk-pk max. Start up time (constant resistive load) – Power On 30 ms typ. – Remote On 30 ms typ. Transient response setting time (25% load step change) 250 µs typ. Short circuit protection continuous, automatic recovery Capacitive load 3.3 5 12 15 ±5 ±12 ±15 VDC VDC VDC VDC VDC VDC VDC models: models: models: models: models: models: models: 1‘760 µF max. 1’000 µF max. 170 µF max. 110 µF max. ±470 µF max. ±100 µF max. ±47 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +100°C max. – Storage –55°C to +125°C Load derating 3.3 %/K above 70°C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F @ 25°C, ground benign) >1.7 Mio h All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TMR 3WI Series 3 Watt General Specifications Isolation voltage (60 sec) – Input/Output 1’500 VDC Isolation capacity – Input/Output 200 pF max. Isolation resistance – Input/Output (500 VDC) >1 GOhm Switching frequency 100 kHz (PWM) Remote On/Off – On: open or high impedance – Off: 2...4 mA to applied via 1 kOhm resistor – Off stand by input current 2.5 mA max. Vibration and thermal shock MIL-STD-810E Safety standards UL /cUL 60950-1, EN 60950-1, IEC 60950-1 Safety approvals – UL/cUL pending Environmental compliance – Reach www.tracopower.com/products/tmr3wi-reach.pdf – RoHS RoHS Directive 2002/95/EC Application notes www.tracopower.com/products/tmr3wi-application.pdf Physical Specifications Casing material non-conductive plastic Potting material silicon, UL 94V-0 rated Weight 4.8g (0.17oz) Outline Dimensions 3 5 6 7 8 (0.36) 2 3.2 (0.13) 1 9.2 Bottom view 0.25 (0.01) Pin-Out 2.0 2.54 2.54 5.08 (0.1) (0.2) (0.08 (0.1) 2.54 2.54 2.54 (0.1) 21.8 (0.1) Single Dual 1 –Vin (GND) –Vin (GND) 2 +Vin (Vcc) +Vin (Vcc) 3 Remote On/Off Remote On/Off 5 No con. No con. 6 +Vout +Vout 7 –Vout Common 8 No con. –Vout (0.1) (0.86) (0.16) 11.1 (0.44) 4.0 0.5 (0.02) 0.5 (0.02) Pin Dimensions in [mm], () = Inch Pin dimension tolerances 0.1 (0.004) Pin pitch tolerances: ±0.25 (±0.01) Tolerances: ±0.5 (±0.02) Specifications can be changed any time without notice. Rev. 09/09 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · [email protected] · www.tracopower.com Page 3 of 3