DC/DC Converters TDR 3 Series, 3 Watt Features ◆ Compact design in SMD or DIP package ◆ Wide 2:1 input voltage range ◆ Fully regulated outputs ◆ Low ripple and noise ◆ No minimum load required ◆ Temperature range –40°C to +85°C ◆ I/O isolation 1500 VDC ◆ Continuous short-circuit protection ◆ Remote On/Off control ◆ Fully RoHS compliant ◆ 3-year product warranty UL 60950-1 The TDR-3 series is a family of compact 3 W dc/dc-converters with 2:1 input voltage ranges and tightly regulated output voltages even under no load conditions. The product is available in SMD-package or in DIP-package. They work with high efficiency over the full load range and come with a remote On/Off input. The usability in temperature ranges of up to 85°C, continuous short circuit protection and excellent immunity against environmental influences make these converters very reliable. A TDR-3 converter is the ideal solution for space critical high end applications in communication equipment, instrumentation and industrial electronics. Models Order code DIP models TDR 3-0511 Order code SMD models TDR 3-0511SM TDR 3-0512 TDR 3-0512SM TDR 3-0513 TDR 3-0513SM TDR 3-0522 TDR 3-0522SM 5.0 VDC Output current max. 600 mA 12 VDC Input voltage range 4.5 – 9.0 VDC (5 VDC nominal) Output voltage 250 mA Efficiency typ. 79 % 80 % 15 VDC 200 mA 81 % ±12 VDC ±125 mA 80 % TDR 3-0523 TDR 3-0523SM ±15 VDC ±100 mA 81 % TDR 3-1211 TDR 3-1211SM 5.0 VDC 600 mA 81 % TDR 3-1212 TDR 3-1212SM 12 VDC 250 mA 82 % TDR 3-1213 TDR 3-1213SM TDR 3-1222 TDR 3-1222SM TDR 3-1223 TDR 3-1223SM 9 – 18 VDC (12 VDC nominal) 15 VDC 200 mA 82 % ±12 VDC ±125 mA 82 % ±15 VDC ±100 mA 83 % TDR 3-2411 TDR 3-2411SM 5.0 VDC 600 mA 81 % TDR 3-2412 TDR 3-2412SM 12 VDC 250 mA 82 % TDR 3-2413 TDR 3-2413SM TDR 3-2422 TDR 3-2422SM TDR 3-2423 TDR 3-2423SM 18 – 36 VDC (24 VDC nominal) 15 VDC 200 mA 83 % ±12 VDC ±125 mA 83 % ±15 VDC ±100 mA 83 % TDR 3-4811 TDR 3-4811SM 5.0 VDC 600 mA 81 % TDR 3-4812 TDR 3-4812SM 12 VDC 250 mA 82 % TDR 3-4813 TDR 3-4813SM 15 VDC 200 mA 82 % TDR 3-4822 TDR 3-4822SM TDR 3-4823 TDR 3-4823SM http://www.tracopower.com 36 – 75 VDC (48 VDC nominal) ±12 VDC ±125 mA 83 % ±15 VDC ±100 mA 83 % Page 1 of 4 DC/DC Converters TDR 3 Series 3 Watt Input Specifications Input current at no load (nominal input voltage) 5 12 24 48 Vin Vin Vin Vin models: models: models: models: 50 mA typ. 30 mA typ. 13 mA typ. 10 mA typ. Input current at full load (nominal input voltage) 5 12 24 48 Vin Vin Vin Vin models: models: models: models: 790 mA typ. 320 mA typ. 160 mA typ. 80 mA typ. Surge voltage (1 sec. max.) 5 12 24 48 Vin Vin Vin Vin models: models: models: models: 15 V max. 25 V max. 50 V max. 100 V max. Input filter capacitor type (see EMC considerations page 3 for compliance to EN 55022 class A/B) ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3 10 V/m, perf. criteria A Fast transient / Surge EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV perf. criteria A with external input capacitor e.g. Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Reflected ripple current (measured with input filter according class A) 5 12 24 48 Vin Vin Vin Vin models: models: models: models: 80 mAp-p typ. 40 mAp-p typ. 30 mAp-p typ. 20 mAp-p typ. Output Specifications Voltage set accuracy ±1 % max Regulation – Input variation Vin min. to Vin max. 0.2 % max. – Load variation 0 – 100 % single output models: 1.0 % max. dual output models: 1.0 % max. balanced load – Load variation 10 – 90 % single output models: 0.5 % max. dual output models: 0.8 % max. balanced load – Load cross regulation 25/100 % 5.0 % max. (dual output models) Minimum load 0 % of rated max. load Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz bandwidth) 30 mVp-p typ. Start up time (constant resistive load) – Power On 5 ms typ. – Remote On 5 ms typ. Transient response setting time (25 % load step change) 250 µs typ. Short circuit protection continuous, automatic recovery Capacitive load 5 12 15 ±12 ±15 VDC VDC VDC VDC VDC models: models: models: models: models: 1680 µF max. 820 µF max. 680 µF max. ±470 µF max. ±330 µF max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 DC/DC Converters TDR 3 Series 3 Watt General Specifications Temperature ranges Load derating – Operating –40°C to +85°C – Storage –55°C to +125°C – Case temperature –40°C to +100°C 3.3 %/K above +70°C Humidity (non condensing) 5 % to 90 % rel. H max. Thermal shock acc. MIL-STD-810F Vibration acc. MIL-STD-810F Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >6.2 Mio h Isolation voltage (60 sec.) – Input/Output 1500 VDC Isolation capacitance – Input/Output 50 pF max. Isolation resistance – Input/Output (500 VDC) >10 GOhm Altitude during operation tba. Safety standard (designed to meet) IEC/EN 60950-1, UL 60950-1 Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913 Switching frequency 100 kHz (PWM) Remote On/Off – On: open or high impedance – Off: 2...4 mA current applied via 1KOhm resistor – Off stand by input current 2.5 mA max. EMC Consideration L1 +Vin +Vout TDR 3 dc/dc-converter C1 -Vin Load Recommended filter for EN 55022 class A compliance -Vout C3 C1 5 VDC 4.7 µF / 25 V 1812 MLCC 12 VDC 6.8 µF / 50 V 1812 MLCC 24 VDC 4.7 µF / 50 V 1812 MLCC 48 VDC 4.7 µF / 100 V 1812 MLCC C3 220pF / 3 kV 1808 MLCC L1 value order code datasheet 10 µH TCK-047 www.tracopower.com/products/tck047.pdf 12 µH TCK-062 www.tracopower.com/products/tck062.pdf TCK-047 www.tracopower.com/products/tck047.pdf 10 µH 10 µH L1 Recommended filter for EN 55022 class B compliance C1 +Vin +Vout TDR 3 dc/dc-converter C2 -Vin Load Input models -Vout C3 Input models C1 & C2 5 VDC 6.8 µF / 25 V 1812 MLCC 12 VDC 24 VDC 48 VDC 4.7 µF / 50 V 1812 MLCC 4.7 µF / 100 V 1812 MLCC C3 220pF / 3 kV 1808 MLCC L1 value order code (SMD type) datasheet 10 µH TCK-047 www.tracopower.com/products/tck047.pdf www.tracopower.com/products/tck062.pdf 12 µH TCK-062 18 µH TCK-046 18 µH TCK-046 www.tracopower.com/products/tck046.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 DC/DC Converters TDR 3 Series 3 Watt Pysical Specifications Casing material non-conductive plastic (UL94V-0 rated) Package weight 4.5 g (0.16oz) Soldering profile for DIP-package models max. 265°C / 10 sec. (wave soldering) Lead-free reflow solder process for SMD-package models as per J-STD-020D.01 (to find at: www.jedec.org - free registration required) – Peak package body temperature245°C Moisture sensivity level (for SMD-package models) level 2a as per J-STD-033B.01 (to find at: www.jedec.org - free registration required) Environmental compliance – Reach www.tracopower.com/overview/tdr3 – RoHS RoHS directive 2011/65/EU Packaging – Tube 10 pcs packing unit – Tape & Reel (only SMD models, add suffix –TR) 200 pcs packing unit Outline Dimensions DIP-Models Pin-Out 0.25 (0.01) 13.55 (0.533) 0-15° 3.8 9 6 18.9 (0.74) 7 (0.4) top view (0.1) 8 2 14 1 0.25 (0.01) 2 Remote On/Off Remote On/Off 6 NC Common 7 NC –Vout 8 +Vout +Vout 9 –Vout Common 14 +Vin (Vcc) +Vin (Vcc) 10.16 top view 2 14 1 2.0 (0.08) (0.1) 2.54 6 1.8 2.54 7 9 18.9 (0.74) 8 1.8 (0.07) 12.8 (0.50) (0.4) 17.2 (0.68) 1.5 (0.06) 1.0 (0.04) (0.1) 2.54 –Vin (GND) 0-4° 7.4 (0.29) (0.4) 10.16 –Vin (GND) 18.1 (0.71) 1.2 1.8 2.54 1 Recommended Solder Pad Dimension: (0.05) (0.07) (0.1) Dual NC = not to connect SMD-Models 8.7 (0.35) Single (0.07) (0.1) 1.8 2.54 10.16 2.54 12.8 (0.50) (0.07) (0.1) 1.3 (0.05) (0.15) 0.8 (0.03) 8.7 (0.35) Pin Dimensions in [mm], () = Inch Tolerances: ±0.5 (±0.02) Pin pich tolerances: ±0.25 (±0.01) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. June 29. 2015 Page 4 of 4