FR2A THRU FR2K SURFACE MOUNT ULTRAFAST RECTIFIER VOLTAGE - 50 to 800 Volts CURRENT - 2.0 Amperes FEATURES l For surface mounted applications l Low profile package l Built-in strain relief l Easy pick and place l Fast recovery times for high efficiency l Plastic package has Underwriters Laboratory SMB/DO-214AA Flammability Classification 94V-O l Glass passivated junction l High temperature soldering: 260 /10 seconds at terminals MECHANICAL DATA Case: JEDEC DO-214AA molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Indicated by cathode band Standard packaging: 12mm tape (EIA-481) Weight: 0.003 ounce, 0.093 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Resistive or inductive load. For capacitive load, derate current by 20%. Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, at TL=90 Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load(JEDEC method) Maximum Instantaneous Forward Voltage at 2.0A Maximum DC Reverse Current TA=25 At Rated DC Blocking Voltage TA=125 Maximum Reverse Recovery Time (Note 1) TJ=25 Typical Junction capacitance (Note 2) Maximum Thermal Resistance (Note 3) Operating and Storage Temperature Range SYMBOLS FR2A FR2B FR2D FR2G FR2J FR2K VRRM VRMS VDC I(AV) 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 UNITS Volts Volts Volts 2.0 Amps IFSM 50.0 Amps VF IR 1.30 5.0 200 Volts A TRR CJ R JL TJ,TSTG NOTES: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A 150 250 40 20.0 -50 to +150 500 nS PF /W 2. Measured at 1 MHz and Applied reverse voltage of 4.0 volts 3. 8.0mm2 (.013mm thick) land areas RATING AND CHARACTERISTIC CURVES FR2A THRU FR2K Fig. 1-FORWARD CURRENT DERATING CURVE Fig. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT Fig. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS Fig. 4-TYPICAL REVERSE CHARACTERISTICS Fig. 5-TYPICALJUNCTION CHARACTERISTICS Fig. 6-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM