Clipped-Sine/CMOS/TTL Leaded TCXO Temperature Compensated Crystal Oscillator • • • • • Excellent frequency stability Wide operating temperature range Clipped-sine/CMOS/TTL output, tight specifications 20.4x12.8x7.8mm standard metal package, case ground for minimizing RF radiation Gull-Wings available for SMT. TO501 Specifications: TO-F Frequency Range: 1.5 MHz ~ 30.0 MHz Operating Temperature: 0°C ~ +50°C -10°C ~ +60°C -20°C ~ +70°C -30°C ~ +75°C -40°C ~ +85°C Storage Temperature: -40°C ~ +85°C Frequency Stability: Vs. Temperature: Vs. Input Voltage: Vs. Load: Aging: ± 0.5 ~ ± 5.0 ppm ± 0.3 ppm at voltage ± 5% ± 0.2 ppm at load ± 10% ± 1.0 ppm max first year Pulling Range: Output Waveform: & Output Load: Supply Current: Clipped-Sine wave: TTL/COMS: Supply Voltage: Phase Noise: Rise/Fall Time: -A -B -C -D -L ± 5 ~ ± 15 ppm (optional) (None for TCXO) Clipped-Sine/10KΩ/10pF TTL/10LSTTL/50±10% CMOS/15pF/50±5% 9.6 MHz ~ 20.0 MHz 20.0 MHz ~ 30.0 MHz 1.5 MHz ~ 20.0 MHz 20.0 MHz ~ 30.0 MHz +3.3 VDC (± 0.2%) +5.0 VDC (± 0.3%) -110dBc/Hz -135dBc/Hz -145dBc/Hz -S -T -C 2.0mA 2.5mA 20mA 25mA -P at 100Hz at 1KHz at 100KHz Pin Configurations 1 VC or NC 7 Ground 8 Output 14 Supply VDD 5ns max (TTL/CMOS) All dimensions are in mm Ordering Information Note: 1. Other frequencies, stabilities, and operating temperature ranges available. Consult VTC Support for specific requirements. 2. Not all combinations of the above, stabilities, and temperature ranges are available. Consult VTC Support if your requirement is not standard. 3. All specifications subject to change without notice. Product name + Operating Temperature + Stability + Output Wave + Pulling Range + Frequency (MHz). i.e. TO501B2.0S-8.0MHz ±2.0ppm/-10°C~+60°C/3.3V Or TO501B1.5CP-8.0MHz ±1.5ppm/-10°C~+60°C/5.0V Phone: +86 10 6301 4184 © 2004 by Vanlong Technology Co., Ltd. Fax: +86 10 6301 9167 Email: [email protected] Web: http://www.vanlong.com TO501