Clipped-Sine & HCMOS OCXO Oven Controlled Crystal Oscillator • Frequency range 2.0MHz ~ 40.0MHz • High reliability, excellent temperature stabilities • Fast warm-up, low power consumption • SC-cut high precision internal thermal crystal CO605 Specifications: CO-E Frequency Range: 2.0 MHz or 40.0 MHz Operating Temperature: Storage Temperature: 0°C ~ +50°C -A -10°C ~ +45°C -B -10°C ~ +55°C -C -20°C ~ +60°C -D -30°C ~ +70°C -E -40°C ~ +85°C Frequency Stability: Accuracy: Vs. Temperature: Short-Term Stability: Aging Rate: ± 5 x 10-9 ± 5 x 10-7 ± 1 x 10-7 ± 5 x 10-8 ± 1 x 10-8 ± 5 x 10-9 ± 1 x 10-11 ± 1 x 10-10 ± 5 x 10-9 - 57 - 17 - 58 - 18 - 59 per second per day per year max Output Waveform: Clipped-Sine Wave, HCMOS Output Level: 1.0 Vp-p min clipped-sine @ 1KΩ TTL, HCMOS compatible Phase Noise: -100dBc/Hz -130sBc/Hz -140dBc/Hz -145dBc/Hz Harmonics Distortion: Supply Voltage: Supply Current: Frequency Adjust: @ 10 Hz @ 100 Hz @ 1 KHz @ 10 KHz Pin -30 dB +5.0 VDC (± 5%) +12.0 VDC (± 5%) Vcc 2 Vref 3 Vc/Nc 4 Ground 5 Output 6 Vcc Ground -P 400mA max at warm-up 100mA max after warm-up at 25°C ±3.0 ppm tuning via ext potentiometer Note: 1. Other frequencies, stabilities, and operating temperature ranges available. Consult VTC Support for specific requirements. 2. Not all combinations of the above, stabilities, and temperature ranges are available. Consult VTC Support if your requirement is not standard. 3. Configurations 1 All dimensions are in mm Ordering Information Product name + Temperature + Stability + Frequency + Other Specification Code. i.e. CO604C18-10.0MHz or CO604D58P-10.0MHz All specifications subject to change without notice. Phone: +86 10 6301 4184 June 2001 Fax: +86 10 6301 9167 Email: [email protected] Web: http://www.vanlong.com Vanlong Technology Co., Ltd.