A1088-A Positioning Products Designed for reliability at excellent GPS performance Purposely developed for automotive and industrial applications, where demanding reliability and quality requirements are at the forefront, the A1088-A GPS receiver can be used in any challenging application. Integrating AEC-Q compliant components and produced in our ISO9001 and TS16949 certified factory, your application can really rely on this component! The A1088-A GPS receiver is a qualified SiRFStar III based product with optimized GPS performance and EMI pre-compliance tests. Get your Evaluation Kit and check out the excellent performance of Vincotech´s A1088-A! High sensitivity Fastest TTFF (Time To First Fix) Low power consumption Small footprint Quality receiver components I I I I I -157 dBm tracking < 35 s under cold start conditions (typical) 99 mW average in tracking mode 28 x 19 mm2 (pin compatible to A1080) AEC-Q compliant Positioning Receiver Portfolio With the mission to support our customers in implementing GPS functionality into their systems, Vincotech is offering a large product portfolio to cover almost all integration possibilities in an easy way. A dedicated R&D team located in the Munich region, Germany, develops sensitive positioning solutions based on state of the art technologies. All GPS products are manufactured in our ISO9001 and TS16949 certified factory in the EU. Our modules comply to the RoHS standard and are 100% electrically and functionally tested prior to packaging. This way we constantly guarantee high quality products. PRODUCTS SHOWN IN ACTUAL SIZE Smart Antenna Modules 19x16 1.8 35 -30/85 * 14x12 3.3 26 -30/85 I I I I I 3.3 26 -30/85 I I I I I 3.3 30 -40/85 I I I I I I Size / mm2 I I I I I 15x15 I I I I I 15x15 I I I I I I 28x19 *SRAM backup possible with Enable pin Circular polarisation I A1035-D A1035-E A1035-H A1085-A** A1086-A** A1086-B** patch I I patch I I patch I I Based on GPS receiver Back-up battery option 19x16 I Size / mm2 SBAS support I I Shielding lid Firmware update (Flash) I I Plug-in module Internal antenna supply I I Smart Antenna Modules Linear polarisation Active antenna I I AEC-Q compliant components AGPS Ephemeris Push I I Shielding lid Low Power Mode Push-To-Fix I I ROM Low Power Mode Trickle Power I I 2nd antenna input Antenna switch Operating temperature / °C I -40/85 Passive antenna Current draw @1fix per sec / mA -30/85 23 Low Power Mode Keep Ephemeris Alive Supply voltage / V 23 3.3 I A1035-H A1035-E External antenna pin A1035-D 3.3 GPS Receivers A1080-A A1080-B A1082-A A1084-A A1084-B A1088-A A1088-A A1084-A Antenna type A1082-A A1080-A SMD solderable GPS Receivers 35x35 A1080-A 21x21 A1082-A I chip I I meander I I meander I I I I I 30x17 A1084-A I 31x17 A1080-A t.b.d. 25x15 A1084-A t.b.d. 25x15 A1084-A **product planned PERFORMANCE Channels Correlators Frequency Sensitivity Tracking Acquisition (cold start) Position accuracy (horizontal) Time To First Fix Hot start1) Warm start2) Cold start3) YOUR PARTNER COMMUNICATION Standard GPS software NMEA message switchable Baud rate Serial ports Tx0 Rx0 20 parallel tracking 200,000 plus L1 – 1,575 MHz -157 dBm -142 dBm < 2.5 m CEP autonomous < 2.0 m CEP SBAS <1s < 32 s < 35 s GGA, GSA, GSV, VTG, RMC, GLL 4,800 (default) to 115,200 3.3 V CMOS compatible NMEA output NMEA input ENVIRONMENT Temperature Operating Storage Humidity POWER Supply Voltage Current draw Acquisition Tracking Standby Antenna supply via VANT Voltage range Max. allowed current4) MECHANICAL Dimensions Weight -40° to +85°C -40° to +105°C Non-condensing 3.0 to 3.6 VDC 36 mA (typical) 30 mA (typical) 20 μA (typical) up to 5.0 V 50 mA 28.0 x 19.0 x 3.0 mm3 1.1” x 0.75” x 0.12” 3.1 g / 0.11 oz. 1) The receiver has estimates of time/date/position and valid almanac and ephemeris data. 2) The receiver has estimates of time/date/position and almanac 3) The receiver has no estimate of time/date/position, and no recent almanac 4) An external current limiter is suggested to avoid damage in fault conditions Vincotech GmbH Biberger Straße 93 82008 Unterhaching/Germany Phone Fax +49 (0)89 8780 67-0 +49 (0)89 8780 67-300 www.vincotech.com/gps The information provided herein is believed to be reliable at press time. Vincotech assumes no responsibility for inaccuracies or omission. Vincotech assumes no responsibility for the use of this information, and all such information shall be entirely at the users own risk. Prices and specifications are subject to change without notice. Vincotech does not authorize or warrant any of its products for use in lifesupport devices and/or systems. Copyright ©2008· Vincotech-027-1108.05-E· Printed in Hungary· GPS A1088-A Technical Details A1088-A