smart positioning iTRAX03 Key Features: • Tiny PCB form factor – 23mm x 23mm x 2.7mm • Ultra-low power consumption – <95mW @ 2.7V • Very High Sensitivity –152dBm (Tracking) • Basic A-GPS support • iTALK and NMEA0183 protocols • Kalman Navigation iTrax03 • Supports remote software updates OEM GPS Receiver Module • Accurate 1PPS timing output • Very High Sensitivity • Ultra Low Power Consumption • Market Leading Programmability • Extensive support for external sensors • Versatile interface ports • iTRAX03/16 – 16MBit Flash Memory iSUITE03 SDK Software Development Kits Datalogger, up to 70.000 datapoints • iTRAX03/8 – 8MBit Flash Memory NMEA Engine Fastrax iTrax03 OEM GPS receiver modules enable the dedicated hardware search engine ensures fast TTFF thus implementation of full-fledged positioning features into no back-up battery is required. These benefits can easily appliances faster and with less effort than ever before. be converted to smaller component costs and smaller design – crucial parameters for many projects. Offering industry-leading benefits in performance, size, power consumption, programmability and total cost of product, the iTrax03 receivers are ideally suited for both iTRAX03/16 – Versatile Programmability industrial tracking and navigation systems and battery- The iTrax03/16 features 16 MBit Flash memory which allows operated consumer products like sports accessories, versatile programmability with iSuite03 SDK. It also allows handheld computers, asset tracking devices, vehicle permanent operation parameter changes via NMEA or iTalk navigation devices and mobile phones. and data logging as a standard feature. Application costs are reduced significantly when no external processor is Market Leading System Performance required and the iTrax03 is used as a host controller. With Ultra-low, user configurable power management makes fewer components, cost and application size are reduced. iTrax03 one of the lowest power consuming, complete 12channel OEM GPS receivers on the market. Nevertheless, iTRAX03/8 – cost efficient performance there are no compromises in performance. The iTrax03 In applications where the industry standard NMEA0183 receivers have a navigation sensitivity as low as –152dBm protocol is sufficient and programmability is unnecessary, making them applicable even for extremely demanding the iTrax03/8 with 8MBit Flash memory, is a cost efficient applications and environments. The iTrax03 includes a full- and high performance alternative. fledged MMC-card interface which enables integrated PDA applications i.e. maps for navigation. A-GPS can be used Quick Start with Easy-To-Deploy Solution to further improve TTFF and acquisition sensitivity. The addition of an antenna and power supply is all that is required to make the iTRAX03 operational. The Fastrax Cutting component costs Engineering Services team can provide antenna design Space and costs are reduced due to the cutting-edge application notes to aid in further refinement of the antenna technology architecture in the iTrax03 receivers. The surface design for specific applications. mount SMD design eliminates need for expensive and labour intensive system and RF connectors. Very few additional components are required. Utilizing the iTrax03 programmability cost of a host CPU can be saved. The iTrax03 OEM GPS Receiver Module Specifications General: L1 frequency, C/A code (SPS) I/O Ports: Dual Asynchronous data ports 12 independent tracking channels 22-pin GPIO (Shared Functionality) Separate search & acquisition engine 2 x SPI-Interface Update rate: 1 fix/s or user configurable Dual Pulse Measurement inputs Accuracy: Position: 3m (CEP), 6m 2DRMS 1PPS Output Velocity: 0.2 m/s (50%) 2 x PulseMeasurement Timers Time: 20ns RMS (static mode) 2 x Capture Timers Reacquisition: 100ms typical (signal reacquisition) TTFF: Out of the box start: 40 s typical Dynamics: Cold Start: 35 s Hot Start: 8s Quick Start: 3s Acceleration: 4G Jerk: 4 m/s3 2 x Clock inputs MMC (Master) connection Protocol: NMEA-0183 V3.0 Proprietary iTALK binary protocol Processor: Proprietary, 32MIPS integrated 16/32-bit DSP-core RISC-like programming under Pre-emptive Real Time Operating System Control (VSDSP RTOS) Sensitivity: -152dBm (tracking) Operating Voltage: 2.7V…3.3V (linearly regulated) Operating Temp: -40C…+85C Dimensions: 23 mm x 23 mm x 2.7 mm (Including RF shield) Antenna Supply: Same as board supply Weight: 3g Antenna: External, passive or active Connection to: 37 SMD connection pods under the module Power Drain: 95mW @ 2.7V (Continuous Mode) Software Features: Flash Memory: iTRAX03/16: 16MBits Flash iTRAX03/8: 8MBits Flash Kalman Navigation 20mW @ 2.7V (Idle Mode) Reprogramming on the fly 60µW @ 2.7V (Sleep Mode) DGPS Supporting RTCM Standard (Active antenna power not included) Advanced Multipath Mitigation Advanced Cross Correlation Mitigation A-GPS Support WAAS / EGNOS Support Other Fastrax GPS products The iTrax03 Family includes iFix03 OEM GPS Measurement Front End, iSuite03 Standard SDK, iSuite03 Professional SDK, iTrax03 iFix03 Evaluation Kit and iTrax03 Development Board. The iTrax03 Evaluation kit includes an universal power supply, two serial cables, an active antenna, a user's manual and a CD with documentation and the GPS WorkBench PC software. The iTrax03 Development Board allows customers to develop custom demanding applications utilizing iTrax03 Evaluation Kit the versatile programmability and extensive connections available on the iTrax03 products. iTrax02 family of products includes iTrax02/4, iTrax04/8, uTracker02, uPatch02 and iTrax02 Evaluation Kit. iTrax02 For programming the iTrax03/16 Fastrax offers iSuite03 Standard SDK (software development kit). In addition to the software the iSuite03 Standard SDK includes three days of hands on training and e-mail support during iSuite03 Standard SDK extensive source code libraries enabling development of application using iSuite03 Professional SDK A-GPS, WAAS / EGNOS, RTK, external sensors, MMC interface, LCD drivers and other communication drivers in addition to Production Support Toolkit. Separate product descriptions can be found at www.fastrax.fi Fastrax Ltd • Valimotie 7 • FIN-01510 Vantaa • FINLAND Adeline Oy 8/2003 development. The iSuite03 Professional SDK gives programmers access to