DTEM10601 Series 42~ 55 Watts Single Output AC/DC Medical Desktop Power Supply FEATURES ● Single Output ● Class I Insulation ● RoHS Compliance ● Protection Type: Auto-Recovery ● Applications: Medical Equipment ● IEC-320-C14 (3 PIN) AC Inlet Connector ● CEC Efficiency Regulations Compliance ● Over Voltage and Short Circuit Protective Installation SPECIFICATIONS: DTEM10601 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range (Limit) 90 - 264VAC Input Frequency 47 - 63Hz OUTPUT SPECIFICATIONS Output Current See Table Output Voltage See Table Line Regulation 1% max. Load Regulation ±5% Output Power See Table Ripple & Noise (20MHz BW) 1.2% max. PROTECTION Over Voltage Protection Yes Short Circuit Protection Automatic recovery GENERAL SPECIFICATIONS Efficiency 85% typ. Class I or Class II Class I LED Indication Yes ENVIRONMENTAL SPECIFICATIONS Operating Temperature 0°C ~ +40°C Storage Temperature -20°C to +85°C MTBF 50,000 hours PHYSICAL SPECIFICATIONS 4.76(L) x 2.36(W) x 1.36(H) inches Dimensions 121(L) x 60(W) x 34.5(H) mm AC Inlet Connector IEC-320-C14 Inlet Output Plug Optional Weight Approximately 280g SAFETY & EMC Safety Standards UL/CUL, TUV/GS, CB, FCC, CE Safety Approvals UL60601-1, EN60601-1, IEC60601-1 OUTPUT VOLTAGE / CURRENT RATING CHART Model DTEM10601A DTEM10601B DTEM10601C DTEM10601D DTEM10601E DTEM10601F Output Voltage 13VDC ~ 17VDC 18VDC ~ 24VDC 12VDC ~ 17VDC 18VDC ~ 24VDC 12VDC ~ 17VDC 18VDC ~ 24VDC Max. Output Current 4.2A 3.0A 4.2A 2.8A 3.5A 2.3A Max. Output Power 55W 55W 50W 50W 42W 42W Note: The output voltage is specified as a range (Ex: 13VDC ~ 17VDC); the customer must specify what they want the voltage set at. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DTEM10601 Series 42~ 55 Watts Single Output AC/DC Medical Desktop Power Supply MECHANICAL DRAWING Unit: inches (mm) Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797