Download Data Sheet

DATASHEET
Rev. C
DTEM1060 SERIES
100~240VAC Input Voltage Range
C14 and C8 AC Inlet Connector Types
42~55 Watts, Single Outputs
rd
3 Edition Medical Safety Approvals
Medical AC/DC Desktop Power Supplies
IEC-320-C14
IEC-320-C8
MEDICAL
FEATURES
 Single Outputs
 100~240VAC Input Voltage Range
 CEC/Energy Star Level V Compliant
 C14, and C8 AC Inlet Connectors Available
 RoHS & WEEE Compliant
 Optional Output Connectors Available
 Short Circuit and Over Voltage Protection
 UL/cUL UL60601-1 (3rd Edition), TUV/RH EN/IEC
 MTBF: > 30,000 Hours
60601-1 (3rd Edition), CB, CE, and FCC Safety Approvals
DESCRIPTION
The DTEM1060 series of medical AC/DC desktop power supplies provides up to 55 Watts of continuous output
power in a 4.72” x 2.36” x 1.37” package. This series consists of single output models with a wide input voltage
range of 100~240VAC. These models are protected against over voltage and short circuit conditions and are
RoHS, WEEE, and CEC/Energy Star Level V compliant. This series also has UL/cUL UL60601-1 (3rd edition),
TUV/RH EN/IEC 60601-1 (3rd edition), CB, CE, and FCC safety approvals. The DTEM1060 series has two AC
inlet connector types available: IEC-320-C14 and IEC-320-C8. Please call factory for ordering details.
09/20/2012
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 1 of 4
DTEM1060 Series
C14 & C8 Inlet Types
42~55 Watts, Single Outputs
Medical AC/DC Desktop Power Supplies
Rev. C
SPECIFICATIONS: DTEM1060 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
Input Current
Inrush Current
OUTPUT SPECIFICATIONS
Output Voltage (See Note 2)
Line Regulation
100
50
defined by changing ±10% of input voltage
from nominal line and rated load.
Unit
240
60
1.5
80
VAC
Hz
A
A
-1
+1
%
-5
+5
See Table
%
0
A
See Table
See Table
8.3
3
ms
s
Automatic recovery
Automatic recovery
85
0
-20
5
30,000
%
40
85
95
°C
°C
%
hours
4.72 x 2.36 x 1.37 inches
(120 x 60 x 34.8 mm)
IEC-320-C14 and IEC-320-C8
9.88oz (280g)
Dimensions (L x W x H)
09/20/2012
Max
See Table
Load Regulation
Output Current
Minimum Load
Output Power
Ripple & Noise
Hold-up Time
Turn-on Time
PROTECTION
Over Voltage Protection
Short Circuit Protection
GENERAL SPECIFICATIONS
Efficiency (typical)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Storage Humidity
MTBF
PHYSICAL SPECIFICATIONS
AC Inlet Connector (See Note 1)
Weight
SAFETY & COMPLIANCE
Safety Standards
Compliance
Typ
UL/CUL UL60601-1 (3rd ed.), TUV/RH EN/IEC 60601-1 (3rd ed.), CB, CE, FCC
RoHS, WEEE, CEC/Energy Star Level V
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 2 of 4
DTEM1060 Series
C14 & C8 Inlet Types
42~55 Watts, Single Outputs
Medical AC/DC Desktop Power Supplies
Rev. C
MODEL SELECTION TABLE
Model Number
(1)
Output Voltage (2)
Input Voltage Range
Output Current
Min
Max
Ripple & Noise (3)
Maximum
Output Power
DTEM10601A
13 ~ 17 VDC
0A
4.2A
250mVp-p
55W
DTEM10601B
18 ~ 24 VDC
0A
3A
350mVp-p
55W
12 ~ 17 VDC
0A
4.2A
250mVp-p
50W
DTEM10601D
18 ~ 24 VDC
0A
2.8A
350mVp-p
50W
DTEM10601E
12 ~ 17 VDC
0A
3.5A
250mVp-p
42W
DTEM10601F
18 ~ 24 VDC
0A
2.3A
350mVp-p
42W
DTEM10602A
13 ~ 17 VDC
0A
4.2A
250mVp-p
55W
DTEM10602B
18 ~ 24 VDC
0A
3A
350mVp-p
55W
12 ~ 17 VDC
0A
4.2A
250mVp-p
50W
DTEM10602D
18 ~ 24 VDC
0A
2.8A
350mVp-p
50W
DTEM10602E
12 ~ 17 VDC
0A
3.5A
250mVp-p
42W
DTEM10602F
18 ~ 24 VDC
0A
2.3A
350mVp-p
42W
DTEM10601C
DTEM10602C
100 ~ 240 VAC
100 ~ 240 VAC
AC Inlet Type
IEC-320-C14
IEC-320-C8
NOTES
1. The number in red represents the type of AC inlet connector: “1” for IEC-320-C14 type and “2” for IEC-320-C8 type.
2. The output voltage is specified as a range (Ex: 18~24VDC); the customer must specify what they want the voltage set at.
3. Ripple and Noise is measured at nominal line and full load with 20MHz limited bandwidth and a 0.1µF ceramic and 47µF aluminum
capacitors in parallel on the output.
4. Optional output connectors are available. Please call factory for ordering details.
MECHANICAL DRAWING
Unit: inches (mm)
1.37±0.04
(34.8±1)
1.37±0.04
(34.8±1)
IEC-320-C14
2.36±0.04 (60±1)
1.37±0.04
(34.8±1)
4.72±0.04 (120±1)
IEC-320-C8
09/20/2012
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 3 of 4
Rev. C
DTEM1060 Series
C14 & C8 Inlet Types
42~55 Watts, Single Outputs
Medical AC/DC Desktop Power Supplies
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working
closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to
provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss
your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
09/20/2012
(603)778-2300
(888)587-9255
(603)778-9797
[email protected]
www.wallindustries.com
5 Watson Brook Rd.
Exeter, NH 03833
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 4 of 4