1N5400 thru 1N5408 Axial Lead Silicon Rectifiers SILICON RECTIFIERS P b Lead(Pb)-Free 3.0 AMPERES 50-1000 VOLTS Features: * Low forward voltage drop. * High current capability. * High reliability. * High surge current capability. Mechanical Data: * Case: Molded plastic. * Epoxy: UL 94V-0 rate flame retardant. * Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed. * Polarity: Color band denotes cathode end. * Mounting position: Any. * Weight: 1.10 grams. DO-201AD DO-201AD Outline Dimensions DO-201AD 25.40 WEITRON http://www.weitron.com.tw 7.30 Unit:mm 9.50 1/3 1.20 1.30 4.80 5.60 29-Mar-07 1N5400 Thru 1N5408 Maximum Ratings and Electrical Characteristics Rating 25°C Ambient Temperature Unless Otherwise Specified. Single Phase HalfWave, 60Hz , Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%. Characteristics Symbol 1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current .375”(9.5mm) lead Length at Ta = 75°C IF(AV) 3.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-WaveSuperimposed on Rated Load IFSM 200 A Maximum Instantaneous At 3.0A DC VF 1.1 V Maximum DC Reverse Current @Ta = 25°C At Rated DC BlockingVoltage @Ta = 100°C IR 5.0 50 μA RθJA 30 °C/W Typical Junction Capacitance CJ 40 PF OperatingTemperature Range TJ +175 TSTG -65 to +170 Typical Thermal Resistance StorageTemperature Range °C °C NOTES: 1. Measured at 1MHz applied reverse voltage of 4.0V DC. 2. Thermal Resistance Junction to case. WEITRON http://www.weitron.com.tw 2/3 29-Mar-07 WEITRON 1N5400 thru 1N5408 AVERAGE FORWARD CURRENT,(A) RATING AND CHARACTERISTIC CURVES (1N5400 THRU 1N5408) 10 3.0 1.0 3.0 2.5 2.0 Single Phase 1.5 Half Wave 60Hz Resistive Or Inductive Load 1.0 0.375"(9.5mm) Lead Length 0.5 0 0 20 40 60 Tj=25 C 80 100 120 140 160 180 200 AMBIENT TEMPERATURE,( C) Pulse Width 300us 1% Duty Cycle FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE 0.1 .01 .6 .7 .8 .9 1.0 1.1 1.2 1.3 FORWARD VOLTAGE,(V) FIG.1-TYPICAL FORWARD CHARACTERISTICS 100 PEAK FORWARD SURGE CURRENT,(A) INSTANTANEOUS FORWARD CURRENT,(A) 50 250 200 150 8.3ms Single Half Tj=25 C Sine Wave 100 JEDEC method 50 0 1 5 50 10 100 NUMBER OF CYCLES AT 60Hz FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Tj=100 C 140 JUNCTION CAPACITANCE,(pF) REVERSE LEAKAGE CURRENT, (µA) 10 1.0 Tj=25 C .1 120 100 80 60 40 20 .01 0 20 40 60 80 100 120 140 0 .01 .05 .1 .5 1 5 10 50 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) REVERSE VOLTAGE,(V) FIG.3 - TYPICAL REVERSE CHARACTERISTICS FIG.5-TYPICAL JUNCTION CAPACITANCE WEITRON http://www.weitron.com.tw 3/3 29-Mar-07