SINGLE-PHASE SILICON BRIDGE RECTIFIER KBPC25005-KBPC2510 VOLTAGE RANGE - 50 TO 1000 Volts CURRENT - 25 Amperes FEATURES MECHANICAL DATA ✶ ✶ ✶ ✶ ✶ ✶ Case: Metal, electrically isolated Epoxy: UL 94V-0 rate flame retardant Terminals: Plated .25”(6.35mm) Faston luge, solderable per MILSTD-202E, Method 208 quaranteed Polarity: As marked Mounting position: Any Weight: 30 grams ✶ ✶ ✶ Metal case for Maximum Heat Dissipation Surge overload ratings-400 Amperes Low forward voltage drop UZR MB-25 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive load. For capacitate load, derate current by 20% PA RAME T E R S Y MB O L Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TC = 55℃ Peak Forward Surge Current 8.3 ms single half sine-wave Superimposed on rated load (JEDEC Method) Maximum Forward Voltage Drop per element at 12.5A DC @TA = 25℃ Maximum DC Reverse Current at Rated DC Blocking Voltage @TA = 100℃ 2 I t Rating for Fusing (t < 8.3ms) Typical Junction Capacitance ( Note 1 ) Typical Thermal Resistance ( Note 2 ) Operating and Storage Temperature Range VRRM VRMS VDC IO Notes: KBPC25005 KBPC2501 KBPC2502 KBPC2504 KBPC2506 KBPC2508 KBPC2510 MB2505 MB251 MB252 MB254 MB256 MB258 MB2510 50 35 50 100 70 100 200 140 200 400 280 400 25 600 420 600 800 560 800 1000 700 1000 IFSM 400 VF 1.1 10 500 374 300 2.5 -55 to +150 IR 2 It CJ RθJc TJ,TSTG 1.Measured at 1 MHz and applied reverse voltage of 4.0 volts 2.Thermal Resistance from Junction to Case per leg. Wing Shing Computer Components Co., (H.K.)Ltd. Homepage: http://www.wingshing.com Tel:(852)2341 9276 Fax:(852)2797 8153 E-mail: [email protected] UNITS Volts Volts Volts Amps Amps Volts uAmps 2 A Sec pF ℃/W ℃ KBPC25005-KBPC2510 RATING AND CHARACTERISTICS CURVES Wing Shing Computer Components Co., (H.K.)Ltd. Homepage: http://www.wingshing.com Tel:(852)2341 9276 Fax:(852)2797 8153 E-mail: [email protected]