SF11 – SF17 WTE POWER SEMICONDUCTORS 1.0A SUPER-FAST RECTIFIER Features ! Diffused Junction ! ! ! ! Low Forward Voltage Drop High Current Capability High Reliability High Surge Current Capability A B A Mechanical Data ! ! ! ! ! ! C Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Weight: 0.34 grams (approx.) Mounting Position: Any Marking: Type Number D DO-41 Dim Min Max A 25.4 — B 4.06 5.21 C 0.71 0.864 D 2.00 2.72 All Dimensions in mm Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) Symbol SF11 SF12 SF13 SF14 SF15 SF16 SF17 Unit VRRM VRWM VR 50 100 150 200 300 400 600 V VR(RMS) 35 70 105 140 210 280 420 V IO 1.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A Forward Voltage @IF = 1.0A VFM @TA = 25°C @TA = 100°C IRM 5.0 100 µA Reverse Recovery Time (Note 2) trr 35 nS Typical Junction Capacitance (Note 3) Cj Operating Temperature Range Tj -65 to +125 °C TSTG -65 to +150 °C Peak Reverse Current At Rated DC Blocking Voltage Storage Temperature Range @TA = 55°C 0.95 1.3 50 1.7 25 V pF *Glass passivated forms are available upon request Note: 1. Leads maintained at ambient temperature at a distance of 9.5mm from the case 2. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. See figure 5. 3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. SF11 – SF17 1 of 3 © 2002 Won-Top Electronics IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 1.00 Single phase half wave Resistive or Inductive load 0.75 0.50 0.25 0 0 25 50 75 100 125 150 Tj = 25°C Pulse width = 300µs 10 SF17 0.1 0.01 0 175 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 30 1000 Tj = 25°C f = 1.0MHz Pulse width 8.3 ms single half-sine-wave (JEDEC method) Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) SF15 - SF16 SF11 - SF14 1.0 20 10 100 SF11 - SF14 SF15 - SF17 10 0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 1 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr +0.5A 50Ω NI (Non-inductive) 10Ω NI Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 5/10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit SF11 – SF17 2 of 3 © 2002 Won-Top Electronics ORDERING INFORMATION Product No.! Package Type Shipping Quantity SF11-T3 DO-41 5000/Tape & Reel SF11-TB DO-41 5000/Tape & Box SF11 DO-41 1000 Units/Box SF12-T3 DO-41 5000/Tape & Reel SF12-TB DO-41 5000/Tape & Box SF12 DO-41 1000 Units/Box SF13-T3 DO-41 5000/Tape & Reel SF13-TB DO-41 5000/Tape & Box SF13 DO-41 1000 Units/Box SF14-T3 DO-41 5000/Tape & Reel SF14-TB DO-41 5000/Tape & Box SF14 DO-41 1000 Units/Box SF15-T3 DO-41 5000/Tape & Reel SF15-TB DO-41 5000/Tape & Box SF15 DO-41 1000 Units/Box SF16-T3 DO-41 5000/Tape & Reel SF16-TB DO-41 5000/Tape & Box SF16 DO-41 1000 Units/Box SF17-T3 DO-41 5000/Tape & Reel SF17-TB DO-41 5000/Tape & Box SF17 DO-41 1000 Units/Box Products listed in bold are WTE Preferred devices. ! T3 suffix refers to a 13” reel. TB suffix refers to Ammo Pack. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com SF11 – SF17 We power your everyday. 3 of 3 © 2002 Won-Top Electronics