WURTH 7508110100

2
PRI
120-375V
132kHz
8
3
SEC
6.2V - 322mA
7
4
5
Cancel
NC
ELECTRICAL SPECIFICATIONS @ 25°C unless otherwise noted:
D.C. RESISTANCE (@20°C):
2-3 , 2.15 Ohms ±10%.
3-4 , 2.85 Ohms ±10%.
7-8 , 0.040 Ohms ±20%.
DIELECTRIC RATING:
4500VAC, 1 minute tested by applying 4500VAC for 1 second between pins 3-8.
4500VAC, 1 minute tested by applying 4500VAC for 1 second between pins 5-8.
500VAC, 1 minute tested by applying 625VAC for 1 second between pins 3-5.
INDUCTANCE:
2.64 mH ±10%, 10kHz, 100mVAC, 0mADC, 2-4, Ls.
SATURATION CURRENT:
350mA saturating current that causes 20% rolloff from initial inductance.
LEAKAGE INDUCTANCE:
30µH typ., 50µH max., 100kHz, 100mVAC, 2-4(tie 7+8), Ls.
TURNS RATIO:
( 3-4 ):( 2-3 ), ( 1 ):( 1 ), ±1%.
( 2-4 ):( 8-7 ), ( 11.07 ):( 1 ), ±1%.
Designed to comply with the following requirements as defined by IEC61558-2-17:
- Reinforced insulation for a primary circuit at a working voltage of 400VDC.
OPERATING TEMPERATURE RANGE:
-40°C to 125°C including temp. rise.
T_0_5280
WE-Midcom, Inc.
Watertown, SD USA
Toll Free: 800-643-2661
Fax: 605-886-4486
This drawing is dual dimensioned.
Dimensions is brackets are in millimeters
Unless otherwise specified, tolerances are as follows:
Angles: ±1°
Fractions: ±1/64
Decimals:±.005(.127mm)
WE-Midcom, Inc.
Drawing Title
Drawing Number
Rev.
Transformer
7508110100
00
Revisions: See Sheet 1
Engineer:APS
Scale ----
Sheet 2 of 5
11/21/2008