TABLE 1: ELECTRICAL SPECIFICATIONS AT 25OC PARAMETER MIN. PRIMARY INDUCTANCE (3-4) FREQ. = 100 KHZ @ 0.40Vrms 2.40 FIGURE 1: SCHEMATIC DIAGRAM SPEC LIMITS TYP. M AX. 2.64 2.85 3 UNITS PRIMARY mHY 4 TURN RATIO'S: 3-4 : 9-8 -------- 1 :.09 -------- + 3% PRI LEAKAGE IND. (3-4) FREQ. = 100 KHZ @ 0.250Vrms TIE 8-9 -------- -------- 80 HY RESONANT FREQUENCY (3-4) 275 -------- -------- 5 SHIELD NC 9 (6.2V@322mA) SECONDARY 8 NC HIPOT: PRIMARY TO SECONDARIES 3000 -------- -------- CANCEL Vrms 5 FIGURE 2: PHYSICAL DIMENSIONS mm (INCHES) WHITE DOT DENOES PIN#1 10 9 1 2 8 7 3 4 6 5 17.0 (.670) MAX CORE TAPED P M 19.0 (.748) MAX 15.0 MAX PNK-36005 Y YWW 4.0 typ 1 2 3 3.2 4 5 15.5 10 9 8 7 * Design to comply with the requirements of IEC950, EN60950, UL1950/CSA950. * Design to comply with the requirements of UL, IEC & CSA Insulation System Class B. * All units comply with the requirements of EU RoHS Directive.COC * 3000 Vrm Isolation (Hi-Pot). Meets UL1950, IEC950 Safety Standard 0.80 6 20.0 MAX RoHS UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN MM DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .X + .25 +0 O 30' .XX + .15 DO NOT SCALE DRAW ING REV. DESCRIPTION OF CHANGES BY 09/14/09 04/19/10 OGIRINAL RELEASE UPDATE TURNS ON STEP 1 & 5 PP PP 01/31/11 UPDATE lk PP TRANSFORMER CONTROL DRAWING PREMIER P/N: PNK-36005 REVISION: 01/31/11 ENGR: PETER PHAM REF: LINK -XT SCALE: NONE SHEET: 1 OF 1