CLV0875E PHASE NOISE (1 Hz BW, typical) Rev C3 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital Cellular • VHF Communications • Base Stations £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 850 Typ Max Units 900 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -112 dBc/Hz Harmonic Suppression (2nd) -17 dBc Tuning Voltage 0.5 4.5 MHz/V 24 Tuning Sensitivity (avg.) 4 dBm 150 pF Pushing 1 MHz/V Pulling (14 dB Return Loss, Any Phase) .1 MHz 85 °C Max Units Power Output -1.5 Load Impedance 1.25 Vdc 50 Input Capacitance Operating Temperature Range -10 Package Style Power Supply Requirements MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 19 Vdc 24 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B CLV0875E Voltage-Controlled Oscillator Surface Mount Module Rev C3 Tuning Curve, typ. FREQUENCY (MHz) 940 930 920 910 900 890 880 870 860 850 840 830 820 810 800 85 °C 25 °C -10 °C 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 5 4 3 2 1 0.030 MIN. CUTBACK FROM LIVE PADS 0 -1 -2 -3 811 830 845 859 872 884 896 907 919 930 FREQUENCY (MHz) 85 °C 25 °C -10 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B