SMV1679L-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Microwave Relay Links • Test Equipment • Satellite Communications / PCS £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1678 Typ Max Units 1680 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -84 dBc/Hz Harmonic Suppression (2nd) -10 dBc Tuning Voltage 0 5 MHz/V 50 Tuning Sensitivity (avg.) -1 dBm Input Capacitance 50 pF Pushing 10 MHz/V Pulling (14 dB Return Loss, Any Phase) 20 MHz 85 °C Max Units Power Output -9 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements -5 Vdc SUB-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 7 Vdc 9 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B SMV1679L-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 1800 1780 1760 1740 1720 1700 1680 1660 1640 1620 1600 1580 1560 1540 1520 1500 1480 85 °C 25 °C -40 °C 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 0 RECOMMENDED FOOTPRINT -1 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. -2 -3 -4 -5 -6 0.030 MIN. CUTBACK FROM LIVE PADS -7 -8 -9 1505 1532 1564 1592 1618 1643 1668 1694 1721 1749 1777 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF Out Vcc GROUND PACKAGE H SUB MINI 0.110 SUB MINI-L 0.080 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B