V618ME01 PHASE NOISE (1 Hz BW, typical) Rev D4 Voltage-Controlled Oscillator Surface Mount Module Applications • Satellite Communications • Microwave Relay Links • Test Equipment £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1626.5 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -99 Harmonic Suppression (2nd) -15 Tuning Voltage 0 Max Units 1660.5 MHz dBc/Hz -13 dBc 3 Vdc MHz/V 42 Tuning Sensitivity (avg.) 0 dBm Input Capacitance 50 pF Pushing 6 MHz/V Pulling (14 dB Return Loss, Any Phase) 3 MHz 70 °C Max Units Power Output -5 Load Impedance Operating Temperature Range 50 -25 Package Style Power Supply Requirements -2.5 MINI-14S Min Typ Supply Voltage (Vcc, nom.) 3 Supply Current (Icc) 15 Vdc 22 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V618ME01 Voltage-Controlled Oscillator Surface Mount Module Rev D4 Tuning Curve, typ. FREQUENCY (MHz) 1750 1725 1700 1675 1650 70 °C 25 °C 1625 -25 °C 1600 1575 1550 0 0.5 1 1.5 2 2.5 3 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 2 1 0 -1 -2 0.030 MIN. CUTBACK FROM LIVE PADS -3 -4 -5 -6 1578 1600 1621 1641 1663 1687 1714 FREQUENCY (MHz) 70 °C 25 °C -25 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B