V585ME04-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Down converters • Earth Stations • £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1190 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -97 Harmonic Suppression (2nd) -5 Tuning Voltage 0.5 Max Units 1610 MHz dBc/Hz -3 dBc 8.5 Vdc MHz/V 90 Tuning Sensitivity (avg.) 10 dBm Input Capacitance 50 pF Pushing 4 MHz/V Pulling (14 dB Return Loss, Any Phase) 10 MHz 85 °C Max Units Power Output 3.5 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 6.75 MINI-14S Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 15 Vdc 20 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V585ME04-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 FREQUENCY (MHz) Tuning Curve, typ. 1820 1770 1720 1670 1620 1570 1520 1470 1420 1370 1320 1270 1220 1170 1120 1070 1020 85 °C 25 °C -40 °C 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 1071 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 0.030 MIN. CUTBACK FROM LIVE PADS 1186 1273 1350 1417 1478 1534 1588 1641 1691 1741 1790 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B