V844ME04-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Fixed Wireless • Satellite Up/Down Conversion • £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 3790 Typ Max Units 3970 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -86 dBc/Hz Harmonic Suppression (2nd) -20 dBc Tuning Voltage 0.5 4.5 MHz/V 76 Tuning Sensitivity (avg.) 4 dBm Input Capacitance 50 pF Pushing 5 MHz/V Pulling (14 dB Return Loss, Any Phase) 5 MHz 85 °C Max Units Power Output 1 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 2.5 Vdc MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 15 Vdc 19 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V844ME04-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 4040 4020 4000 3980 3960 3940 3920 3900 3880 3860 3840 3820 3800 3780 3760 3740 3720 3700 3680 3660 3640 3620 85 °C 25 °C -40 °C 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 8 7 6 5 4 3 0.030 MIN. CUTBACK FROM LIVE PADS 2 1 0 -1 -2 3659 3709 3751 3790 3826 3862 3899 3936 3973 4012 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B