MICROPROCESSOR CRYSTALS ULTRA MINIATURE CERAMIC SURFACE MOUNT ABM3C 5.0 x 3.2 x 1.3 mm FEATURES: • Ultra miniature size 5.0 x 3.2 x 1.3 mm max. • Suitable for reflow. • Ceramic package with heat-resistant glass sealing. • Fundamental mode. • Tight Stability available. APPLICATIONS: • • • • Cellular telephones, Pagers. Communication, Test equipment. High density applications. Cordless telephones, Fascimiles STANDARD SPECIFICATIONS Frequency 3.5 10.000MHz MHz - 25 MHz FrequencyRange Range - 40.000MHz STAN DARD SPECIF ICAT IO Operation Mode Fundamental, ATNS AT Operation Mode Fundamental, Operating -10°C 60° C(See (See Options) OperatingTemperature Temperature -10°Cto to++70°C Options) Storage Temperature -55°C to + 125° C Storage Temperature -40°C to +85°C @ Frequency ± 50 ppm max. Options) FrequencyTolerance Tolerance @25°C 25°C ± 50ppm max.(See (See Options) Frequency Stability over Temp. ± 50 ppm max. (See Options) Frequency Stability over Temp. ± 50ppm max. (See Options) Equivalent Series Resistance 200 W for 3.5 MHz < F < 4.0 MHz Equivalent Series Resistance 60 W max. for 10.0MHz < F < 16.0MHz (ESR) Maximum 150 W for 4.0 MHz < F < 6.0 MHz (ESR) Maximum 50 W max. for 16.0MHz < F < 40.0MHz 100 W for 6.0 MHz < F < 10.0 MHz Shunt Capacitance C0 80 W for 107pF MHzmax. < F < 14.0 MHz _ 25 MHz Load Capacitance CL F (See 50 W 18p for 14 MHz Options) <F< Shunt C0 7100 pFµW max. DriveCapacitance Level max., 10 µW correlation Load Capacitance CLYear 16 p F (See ±5pp Option)m max. @ 25°C First Aging Drive Level Resistance 100 µW max. Insulation 500MW min. at 100Vdc ±15V Aging @ 25° C First Year ± 5 pp m max. Environmental, and mechanical specifications, see appendix C. Group 2. Tape and Reel, see appendix H.(1,000 pcs / reel) Marking, see appendix G. Reflow profile, see appendix E. Application notes, see appendix A. Recommended handling, see appendix F. ORDERING OPTIONS ABM3C - Frequency - CL - ESR - Temperature - Tolerance - Stability - Packaging -2 for ± 20ppm max.** -3 for ± 25ppm max.** -4 for ± 30ppm max. XX.XXXX MHz Load cap.in pF or -S for Series -Y for ± 30ppm max.* -H for ± 35ppm max.* RXXX( value in W ) -E for 0 °C to + 70°C -B for -20°C to + 70°C -C for -30°C to + 70°C -N for -30°C to + 85°C -D for -40°C to + 85°C ABRACON 12 ® C O R P O R AT I O N -T (Tape & Reel) Dimensions: Inches (mm) * -10°C to +70°C only ** Please call for availability. (±100ppm max. stability) NOTE: Left blank if standard • All specifications and markings subject to change without notice 29 Journey • Aliso Viejo, CA 92656 • USA (949) 448-7070 • F AX : (949) 448-8484 E-MAIL: abinfo@ abracon.com • INTERNET ADDRESS: www.abracon.com ABRACON IS ISO 9001 / QS 9000 CERTIFIED