CERAMIC SMD CRYSTAL ABM3C RoHS /RoHS II Compliant 5.0 x 3.2 x 1.3mm ABM3C Series products with the Date Code/Traceability Code marking ending in “X” are Glass-Sealed and the following RoHS Exemption applies: Pb in Glass, exemption 7C-I per RoHS II Directive 2011/65/EU Annex ABM3C Series products with the Date Code/Traceability Code marking ending in “C” and “F” are Seam-Sealed and are Pb-Free. Moisture Sensitivity Level – MSL – N/A (The ABM3C Series is a Hermetically Sealed device and not moisture sensitive) FEATURES: • Low height; suitable for thin equipment. • New seam sealed package available (code “C”) • Tight tolerance and stability available. • Suitable for RoHS compliant reflow profile APPLICATIONS: • High density applications. • Modems, communication and test equipment. • PMCIA, Wireless applications STANDARD SPECIFICATIONS: Parameters Frequency Range Operation Mode Operating Temperature Storage Temperature Frequency Tolerance @+25°C Frequency Stability over the Operating Temperature ( ref. to +25°C) Minimum Typical Maximum Units Notes 50.000 MHz Fundamental -10 -40 -50 +70 +90 +50 ºC ºC ppm See options -50 +50 ppm See options Ω 10.000 – 15.999MHz 16.000 – 50.000MHz 10.000 Fundamental 60 50 7 Equivalent series resistance (R1) Shunt capacitance (C0) Load capacitance (CL) 18 Drive Level 10 Aging pF -5 Insulation Resistance pF 100 µW +5 ppm 500 MΩ See options Standard (See options if other than STD) @25°C±3°C First year @ 100Vdc ± 15V OPTIONS & PART IDENTIFICATION: (Left blank if standard) ABM3C - MHz - - - Frequency in MHz Please specify the frequency in MHz. e.g. 14.31818MHz Packaging Blank: Bulk T: Tape & Reel Load Capacitance (pF) Please specify CL in pF or S for series Custom ESR if other than standard R□ □: Specify a value in Ω (e.g.: R40) - Freq. Stability Y: ± 30 ppm H: ± 35 ppm A: ± 80 ppm Operating Temp. E: 0°C ~ +70°C B: -20°C ~ +70°C C: -30°C ~ +70°C N: -30°C ~ +85°C D: -40°C ~ +85°C Freq. Tolerance 2: ± 20 ppm 3: ± 25 ppm 4: ± 30 ppm Revised: 07.31.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Visit www.abracon.com for Terms & Conditions of Sale ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED CERAMIC SMD CRYSTAL ABM3C RoHS /RoHS II Compliant OUTLINE DRAWING: 5.0 x 3.2 x 1.3mm REFLOW PROFILE: Sealing Method : Glass Sealing for parts with Traceability Code ending in “X” Seam Sealing for parts with Traceability Code ending in “C” and “F” Dimensions: inches (mm) TAPE & REEL: 1000pcs/reel Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 07.31.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com