THRU-HOLE POWER INDUCTORS AIUR-05, AIUR-06 SERIES | | | | | | | | | | | | | | | OPTIONS: • Bulk Pack is standard FEATURES: • Ferrite core with heat shrink tube • High Reliability APPLICATIONS: • Electronic Appliance • Noise Filtering STANDARD SPECIFICATIONS: Part Number AIUR-05 3R3M 4R7M 6R8M 100K 150K 220K 330K 470K 680K 101K 151K 221K 331K 471K 681K 102K 152K L (µH) Q Min Test Freq (MHz) R DC (Ω) Max IDC (A) Max SRF (MHz) Min 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 10 10 10 20 20 20 20 20 20 15 15 15 15 10 10 20 30 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.252 0.252 0.013 0.017 0.022 0.031 0.042 0.070 0.092 0.130 0.160 0.230 0.400 0.530 0.780 1.000 1.500 2.200 3.500 4.50 3.70 3.10 2.50 2.00 1.60 1.30 1.10 0.91 0.75 0.61 0.50 0.41 0.34 0.28 0.23 0.18 38 30 24 19 15 12 10 8.2 6.6 5.4 4.3 3.5 2.8 2.3 1.9 1.5 1.2 PHYSICAL CHARACTERISTICS: 0.20±0.04 5,0±1,0 0.335Max 8,50 0.197 5,00 MARKING Ø0.026 Ø0,65 0.354Max 9,00 TECHNICAL INFORMATION: • Lp tolerance: K = ±10%, M = ±20% • Letter suffix indicates standard tolerance • IDC Max: typical 10% inductance drop from initial value • Operating Temperature: -40°C to +125°C with no load -40°C to +85°C with full rated current • Marking: Inductance and tolerance • Warping: UL Heat Shrink tube STANDARD SPECIFICATIONS: Part Number AIUR-06 L (µH) R DC (Ω) Max IDC (A) Max Part Number AIUR-06 L (µH) R DC ( Ω) Max IDC (A) Max Part Number AIUR-06 L (µH) R DC (Ω) Max IDC (A) Max 3R9K 4R7K 5R6K 6R8K 8R2K 100K 120K 150K 180K 220K 270K 330K 390K 470K 560K 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 0.016 0.018 0.021 0.023 0.026 0.031 0.036 0.040 0.041 0.043 0.046 0.051 0.054 0.063 0.075 14.2 13.0 11.0 10.0 9.5 8.8 7.9 7.1 7.4 6.1 5.5 5.2 4.5 4.1 3.8 680K 820K 101K 121K 151K 181K 221K 271K 331K 391K 471K 561K 681K 821K 102K 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 0.078 0.088 0.108 0.127 0.162 0.228 0.252 0.270 0.394 0.416 0.568 0.65 0.74 1.00 1.20 3.5 3.1 2.8 2.6 2.4 2.1 1.9 1.75 1.62 1.40 1.30 1.20 1.10 0.96 0.88 122K 152K 182K 222K 272K 332K 392K 472K 562K 682K 822K 103K 123K 153K 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 1.5 1.7 1.8 2.4 2.8 3.7 5.0 5.6 6.3 8.4 9.6 10.5 14.5 20.5 0.80 0.72 0.66 0.60 0.54 0.48 0.42 0.40 0.37 0.34 0.31 0.29 0.25 0.23 TECHNICAL INFORMATION: PHYSICAL CHARACTERISTICS: 0.71Max 18,0 0.50Max 12,7 0.625 15,88 0.375 9,53 ABRACON IS ISO 9001 / QS 9000 CERTIFIED rev1.1-8/04 Ø0.032 Ø0,81 0.290 7,37 • Test frequency: 10KHz 0.1VRMS • Tolerance: K=10% (Standard) • Letter suffix indicates standard tolerance • Temperature: -40°C to +125°C with no load -40°C to +85°C with full rated current • Marking: Value and tolerance • L drops 10% typical @ IDC from initial value • UL Shrink Tube • Check SCD for detail E&M specification 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com