SURFACE-MOUNT CMOS PROGRAMMABLE OSCILLATOR Pb RoHS Compliant AP2S 2.5 x 2.0 x 0.9mm | | | | | | | | | | | | | | | FEATURES: • Short lead time • Suitable for mass production • Alternative to long lead-time XO's • Performance comparable to fixed frequency oscillator • Lowest peak-to-peak jitter • Low supply current ELECTRICAL SPECIFICATIONS: Characteristics Frequency Range (3.3V) (2.5V) (1.8V) Operating Temp. Range (See Options) Freq. stability over operating temp.* (See Options) Input Voltage (Operating Vdd) Input Current Input Current Input Current Output Type Output Load Output "0" level Output "1" level (3.3V) (2.5V) (1.8V) For Small Quantities, Delivery Time is 1-5 days Unit MHz MHz MHz °C Minimum 3 3 3 -10 Typical ----- Maximum 110 90 75 60 ppm V V V mA mA mA -100 2.97 2.25 1.62 -3.3 2.5 1.8 100 3.63 2.75 1.98 25 15 10 pF V V V V V V % uA nSec nSec ----2.97 2.25 1.62 45 ---- psec -- CMOS (3.3V) (2.5V) (1.8V) (3.3V) (2.5V) (1.8V) Symmetry Standby Curent Rise Time (10%->90% Vdd) Fall Time (90%->10% Vdd) Tri-state Function (Input to pin 1) Jitter peak-to-peak** 15 ------50 -2.5 2.5 pin 1 : High or Open , pin 3 : Enable pin 1 : Low , pin 3 : Disable 30 to 70 -0.33 0.25 0.18 ---55 10 --- -- * Inclusive of calibration @25°C, operating temperature range, input voltage variation, load variation, aging, shock, and vibration. ** Jitter performance depends on programing parameter and output frequency. Please contact ABRACON for additional info. OPTIONS & PART IDENTIFICATION: (Left blank if standard) Supply Voltage Blank* 3.3 V 1 2.5 V 2 1.8 V *3.3V : Standard AP2S -Frequency- - - - Operating Temp. 0°C to +50°C I -10°C to +60°C D -20°C to +70°C E -30°C to +70°C F -30°C to +85°C N -40°C to +85°C L Freq. Stability ±20ppm J(**) ±25ppm R ±30ppm K ±35ppm H ±40ppm B ±50ppm C PIN 1(Option) OE **B PDB **Blank Packaging B Bulk T Tape and Reel Ask for Tube Package (* * *)Available for I, D, or E temp options only. Contact ABRACON for EJ or LR options. (Availability limited) ** OE: Tri-state the output buffer. ** PDB: Tri-state the output buffer and shut off the oscillator, <10μA when PDB enabled. ABRACON IS ISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 1.04.08 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SURFACE-MOUNT CMOS PROGRAMMABLE OSCILLATOR AP2S Pb RoHS Compliant 2.5 x 2.0 x 0.9mm | | | | | | | | | | | | | | | TEST CIRCUIT: OUTLINE DRAWING: PIN #1 #2 CONNECTION STAND-BY / OE GND/CASE #3 #4 OUTPUT VDD Note: It is recommended to use an approximately 0.01uF bypass capacitor between PIN 2 and 4. Dimensions: inch (mm) (mm) Dimensions: Inches TAPE & REEL: Tape and reel 1,000pcs/reel Dimensions: mm ABRACON IS ISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 1.04.08 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com