ACT ACT132SMX

Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
[email protected]
ACT132SMX
The ACT132SMX is a low height, plastic moulded package incorporating a cylinder type
crystal. It is ideally suitable for automatic insertion, especially where high density surface
mounting is needed. It has excellent shock and heat resistant properties.
Applications include Radio Communications Equipment, Pagers, Cellular Phones, portable
applications and a variety of clock sources.
Specification
Parameter
Symbol
Specification
Frequency Range
Frequency Tolerance
Frequency v Temperature
Turnover Temperature
Temp. Coefficient
Temp Operating Range
Temp Storage Range
Equivalent Series Resistance
Shunt Capacitance
Motional Capacitance
Load Capacitance
Maximum Drive Level
Drive Level
Aging
Reflow Profile
fo
Δf/fo
Δf/fo
Tp
K
Tope
Tsto
ESR
C0
C1
CL
DL
DL max
Fa
Tsol
32.768KHz
±20, ±30, ±50, ±100ppm Please specify
See Drawing
+25°C ±5°C
-3.5 x 10-8/°C2
-40 ~+85°C
-55 ~ +125°C
55KΩ max
0.9pF typical
2.3fF typical
12.5pF
Please refer to note 1
1μ W recommended
0.1μ W
±5ppm max
25°C ±3°C, first year
See diagram: page 4
Dimensions in mm
Suggested Footprint
3.88
Note 1
A 7pF load capacitance device is
available but at present this device is
not RoHS compatible. The reflow
profile for this device is available on
request.
1.2
7.3 max
#4
1.3
#3
2.6
#1
Condition
2.4
#2
1.8 2.0 max
0.4
5.08
4.3 max
Lead Free-RoHS
comp.
Pad Surface Material
SnBi 0.007-0.012mm
A solder containing >85% Lead as
an inapplicability substance is
used on an internal terminal.
Exempt under the RoHS
legislation (1000ppm Pb)
Please note that all parameters can not necessarily be specified in the same device
Customer to specify : Frequency, Frequency Tolerance, Operating Temperature Range, Load Capacitance
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered - Registration number 6830/2
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
1 of 4
Issue : 5 A3
Date :26/7/0
Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
[email protected]
ACT132SMX TAPE AND REELING
3.000 PIECE REELS
MATERIAL
Tape
Reel
POLYSTYRENE
MPPE
ORIENTATION IN CARRIER TAPE
LAYOUT OF TAPE
No Components
20 Pockets Minimum
Cover Tape Leader
400mm Minimum
Start of carrier tape bent vertically and hooked into reel slot.
COVER TAPE OVERLAP
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered - Registration number 6830/2
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
2 of 4
Issue : 5 A3
Date :26/7/0
Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
[email protected]
ACT132SMX TAPE & REELING SPECIFICATION cont'd
PEEL STRENGTH
Using method below the force to start the tape peeling with a pull speed of 300±10 mm/min shall be 0.1~1.3N.
REEL DIMENSIONS (mm)
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered - Registration number 6830/2
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
3 of 4
Issue : 5 A3
Date :26/7/0
Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
[email protected]
ACT132SMX TAPE & REELING SPECIFICATION cont'd
CARRIER TAPE DIMENSIONS (mm)
ACT132SMX REFLOW SOLDERING PROFILE
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered - Registration number 6830/2
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
4 of 4
Issue : 5 A3
Date :26/7/0