ACT ACTF03-27

Tel : +44 118 979 1238
Fax : +44 118 979 1283
Email: [email protected]
The ACTF03/27/903.75-926.25/TO39 is a low-loss, compact, and economical
surface-acoustic-wave (SAW) filter in a low-profile metal TO-39 case. It is designed as an RF
duplexer for cordless telephones ( ISM ). Centre frequency is 903.75 / 926.25 MHz.
1. Package Dimension (TO-39)
2.
Pin
Configuration
1
Port 1 / Port 2
2
Antenna
3
Port 2 / Port 1
4
Case Ground
Dimensions
Data (Unit: mm)
A
9.35±0.10
B
5.08±0.10
C
3.40±0.10
D
3.00±0.20
E
0.45±0.20
3. Test Circuit
4. Features
l
l
l
l
High stability and reliability with good performance
No matching network required for operation at 50 Ω
Wide and sharp pass band characteristics
Low insertion loss and deep stop band attenuation for interference
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered - Registration number 6830/2
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Issue : 1 C1
Date : SEPT 04
Tel : +44 118 979 1238
Fax : +44 118 979 1283
Email: [email protected]
5. Typical Frequency Response
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered - Registration number 6830/2
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Issue : 1 C1
Date : SEPT 04
Tel : +44 118 979 1238
Fax : +44 118 979 1283
Email: [email protected]
6. Electronic Specification
6-1.Maximum Ratings
Item
Symbol
Rating
Unit
Input Signal Level
ISmax
5
dBm
DC Permissive Voltage
VDC
0
V
Operating Temperature Range
TA
-10 ~ +60
°C
Storage Temperature Range
Tstg
-40 ~ +85
°C
6-2.Electronic Characteristics
Ant term. impedance
Port 1 term. impedance
Port 2 term. impedance
ZAnt = 50 Ω
ZPort1 = 50 Ω
ZPort2 = 50 Ω
Port 1
Items
Port 2
Symbol
Centre
Frequency
fC
Unit
Test condition
Min.
Typ.
-
-
903.75
Max.
Test condition
Min.
Typ.
-
-
926.25
Max.
MHz
Bandwidth
BW 3dB
-
±1.0
-
-
-
±1.0
-
-
Insertion Loss
IL PASS
fC±1.0MHz
-
-
4.5
fC±1.0MHz
-
-
4.5
dB
Ripple Level
ARIP
fC±1.0MHz
-
-
2.0
fC±1.0MHz
-
-
2.0
dB
Rejection
Level
ILSTOP
MHz
450.0~861.95MHz
47
-
-
450.0~870.0MHz
52
-
-
dB
861.95~883.35MHz
30
-
-
870.0~882.45MHz
44
-
-
dB
883.35~894.05MHz
5
-
--
882.45~904.75MHz
30
--
-
dB
913.45~924.15MHz
5
-
-
904.75~905.85MHz
36
-
-
dB
924.15~927.25MHz
38
-
-
905.85~916.55MHZ
8
-
-
dB
945.55~970. 0MHz
23
-
-
935.95~946.65MHz
5
-
-
dB
970.0~1050MHz
45
-
-
946.65~948.65MHz
30
-
-
dB
1050~1350MHz
42
-
-
968.05~1000MHz
26
-
-
dB
1350~1800MHz
22
-
-
1000~1350Mhz
42
-
-
dB
1350~1800MHz
22
-
-
dB
Isolation
(between port1
and port2)
IL
RX←→TX
925.25~927.25MHz
36
-
-
902.75~904.75MHz
36
-
-
dB
Input / Output
Impedance
ZI / ZO
-
-
50
-
-
-
50
-
Ω
iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling!
1.
2.
3.
4.
5.
Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is
connected to a 50 Ω test system with VSWR ≤1.2:1. The test fixture L and C are adjusted for minimum
insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are
dependent on the impedance matching component values and quality.
Unless noted otherwise, specifications apply over the entire specified operating temperature range.
The specifications of this device are based on the test circuit shown above and subject to change or
obsolescence without notice.
All equipment designs utilizing this product must be approved by the appropriate government agency prior to
manufacture or sale.
Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications,
processes and circuits implemented within components or assemblies.
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered - Registration number 6830/2
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Issue : 1 C1
Date : SEPT 04