Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] The ACTF8014/897.5/DCC6 is a low-loss, compact, and economical surface-acoustic-wave (SAW) RF filter in a surface-mount ceramic DCC6 case for mobile communications ISM900 systems. It provides low insertion loss and high attenuation. ( Nominal Centre Frequency 897.5 MHz) 1. Package Dimension (DCC6) 2. Pin Configuration 2 Input 5 Output 1,3,4,6 Ground Sign Data (unit: mm) Sign Data (unit: mm) A 1.9 E 1.2 B 0.64 F 3.8 C 1.0 G 3.8 D 1.27 3. Test Circuit In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 4. Frequency Characteristics 5. Performance 5-1.Maximum Ratings Value Units Pin 10 dBm VDC 12 V Rating Input Power Level DC Voltage Storage Temperature Range Tstg -40 to +85 °C Operating Temperature Range TA -10 to +65 °C In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 5-2.Electronic Characteristics Characteristic Minimum Typical Maximum Units fC -- 897.500 -- MHz BW -- 26 -- MHz -- 3.0 4.5 dB -- -- 2.0 dB 25 28 32 20 27 33 42 25 ----- dB dB dB dB Nominal Centre Frequency Usable Pass Bandwidth Insertion Loss IL 884.50 …. 910.50 MHz Δα Passband Ripple 884.50 …. 910.50 MHz α Absolute Attenuation DC …. 783.00 MHz 783.00 …. 863.00 MHz 933.00 …. 1063.0 MHz 1063.0 …. 2000.0 MHz Input / Output Impedance (Nominal) 50 Ω iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. 3. 4. 5. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50Ω test system with VSWR≤1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04